# changelog

author: Marcela Mašláňová <mmaslano@redhat.com> - 3.1.13-16
changelog:
  - the correct solution is remove smp_flags, they don't work properly on ppc with
    the option mpower7
  - Related: rhbz#1048745


author: Tomáš Mráz <tmraz@redhat.com> - 3.1.13-21
changelog:
  - correct the DST correction when using UTC time specification (#1328832)
  - clear non-job files from at dir and test for write error on fclose
    to fix bogus syslog messages


author: Tomáš Mráz <tmraz@redhat.com> - 3.1.13-23
changelog:
  - fix the ownership of the spool directory (#1414228)
  - document the -n option of atd (#739870)
  - fix handling of the aborted jobs (due to possibly
    temporary conditions) and avoid flooding the syslog


author: Steve Grubb <sgrubb@redhat.com> 2.8.4-1
changelog:
  resolves: #1559032 - Rebase audit package to 2.8.4 to pick up bug fixes
  resolves: #1573889 - auditd busy loop in rotate_logs() with num_logs < 2
  resolves: #1534748 - incorrect addr field when using IPv6 for remote logging
  resolves: #1515903 - ausearch-expression man page missing \timestamp_ex
  resolves: #1511606 - aureport AVC report header is incomplete
  resolves: #1504251 - make auditd dump internal state for log writing status


author: Steve Grubb <sgrubb@redhat.com> 2.8.5-1
changelog:
  resolves: #1651761 - Rebase audit package to 2.8.5 to pick up bug fixes
  resolves: #1462178 - audit rule arch changed from b32 to b64 on ppc64le
  resolves: #1614833 - audispd loops reloading config 
  resolves: #1622194 - audisp-remote memory leak when using krb5 
  resolves: #1625156 - audisp-remote wont connect if remote ending action not reconnect
  resolves: #1628626 - aureport -a --failed does not display user_avc events 
  resolves: #1648005 - tcp listener socket fails when ipv6.disable=1 boot command
  resolves: #1650670 - space left in auditd.conf expressed as a percentage 
  resolves: #1663285 - ausearch device/inode missing when using a single file 
  resolves: #1672287 - max_log_file_action "keep_logs" doesn't behave as described


author: Miroslav Lichvar <mlichvar@redhat.com> - 5.18-1
changelog:
  - Update to 5.18
  - Fix multilib conflicts (#831379)
  - Make some dependencies arch-specific
  - Remove obsolete macros


author: Michal Sekletar <msekleta@redhat.com> - 0.6.31-15
changelog:
  - enable hardened build (#1092506)
  - fix short option for --version, document -t option of avahi-autoipd (#948583)
  - fix crashes in D-Bus methods GetAlternativeHostName and GetAlternativeServiceName (#1003688)
  - fix bug when avahi-daemon ended up in a tight loop (#1081801)
  - remove prefix /home/lennart/tmp/avahi from references in man pages (#1120233)


author: Michal Sekletar <msekleta@redhat.com> - 0.6.31-17
changelog:
  - fix crash due to use of deprecated Gtk3 API (#1263720)
  - don't add 0pointer.de and zeroconf.org to default browse list (#1340837)
  - fix not publishing entries if a probing interface is removed (#1222646)


author: Michal Sekletar <msekleta@redhat.com> - 0.6.31-18
changelog:
  - create home directory for avahi-autoipd user (#1416287)
  - get rid of the dangling symlink to avahi-discover in debuginfo package (#1421229)


author: Ville Skyttä <ville.skytta@iki.fi> - 1:2.0-1
changelog:
  - Update to 2.0 (fixes #817902, #831835).
  - Don't try to python-bytecompile our non-python *.py (#813651).


author: Ville Skyttä <ville.skytta@iki.fi> - 1:2.1-1
changelog:
  - Update to 2.1 (fixes #860510, #906469, #912113, #919246, #928253).
  - Don't ship completions included in util-linux 2.23-rc2 for F-19+.


author: Roman Rakus <rrakus@redhat.com> - 2.1-4
changelog:
  - Added conditionals to not add completions for some commands; the packages
    has their own completions
    Resolves: #1007839


author: Petr Machata <pmachata@redhat.com> - 1.53.0-18
changelog:
  - Turn off build flags pre-set by Boost distribution.
    (boost-1.53.0-buildflags.patch)
  - Pass RPM_OPT_FLAGS through user-config.jam.


author: Petr Machata <pmachata@redhat.com> - 1.53.0-21
changelog:
  - Fix atomic_cas32 (thanks Jaroslav Škarvada for figuring out where
    the problem is) (boost-1.54.0-interprocess-atomic_cas32-ppc.patch)


author: Jonathan Wakely <jwakely@redhat.com> - 1.53.0-26
changelog:
  - do not use arch-specific BuildRequires (#1268268)
  - support TLS libraries without SSLv3 (#1298227)


author: Jonathan Wakely <jwakely@redhat.com> - 1.53.0-26
changelog:
  - Install unpatched gcc.jam (#1305019).
  - Build libboost_python and libboost_python3 such that they depend on
    their respective libpython (#1302120).
    (boost-1.53.0-python-libpython_dep.patch,
    boost-1.53.0-python-abi_letters.patch)
  - Fix Boost.Python test suite so that PyImport_AppendInittab is called
    before PyInitialize, which broke the test suite with Python 3.
    (boost-1.53.0-python-test-PyImport_AppendInittab.patch)
  - Patch gcc.jam to not add bogus rpaths.


author: Petr Sabata <contyk@redhat.com> - 1.5-1
changelog:
  - 1.5 bump
  - BuildRoot and defattr cleanup
  - Use macros in Sources
  - Drop show-ports and foreach patches -- those have been included upstream


author: Petr Sabata <contyk@redhat.com> - 1.5-2
changelog:
  - Add three latest bugfixes from upstream git on top of 1.5
  - Dropping params patch (included upstream variant)


author: Kai Engert <kaie@redhat.com> - 2017.2.16-71
changelog:
  - Update to CKBI 2.16 from NSS 3.32. In addition to removals/additions,
    Mozilla removed code signing trust from all CAs (rhbz#1472933)


author: Bob Relyea <rrelyea@redhat.com> - 2019.2.32-76
changelog:
  - Update to CKBI 2.32 from NSS 3.44
  -   Removing:
  -   # Certificate "Visa eCommerce Root"
  -   # Certificate "AC Raiz Certicamara S.A."
  -   # Certificate "TC TrustCenter Class 3 CA II"
  -   # Certificate "ComSign CA"
  -   # Certificate "S-TRUST Universal Root CA"
  -   # Certificate "TÜRKTRUST Elektronik Sertifika Hizmet Sağlayıcısı H5"
  -   # Certificate "Certplus Root CA G1"
  -   # Certificate "Certplus Root CA G2"
  -   # Certificate "OpenTrust Root CA G1"
  -   # Certificate "OpenTrust Root CA G2"
  -   # Certificate "OpenTrust Root CA G3"
  -  Adding:
  -   # Certificate "GlobalSign Root CA - R6"
  -   # Certificate "OISTE WISeKey Global Root GC CA"
  -   # Certificate "GTS Root R1"
  -   # Certificate "GTS Root R2"
  -   # Certificate "GTS Root R3"
  -   # Certificate "GTS Root R4"
  -   # Certificate "UCA Global G2 Root"
  -   # Certificate "UCA Extended Validation Root"
  -   # Certificate "Certigna Root CA"
  -   # Certificate "emSign Root CA - G1"
  -   # Certificate "emSign ECC Root CA - G3"
  -   # Certificate "emSign Root CA - C1"
  -   # Certificate "emSign ECC Root CA - C3"
  -   # Certificate "Hongkong Post Root CA 3"


author: Bob Relyea <rrelyea@redhat.com> - 2020.2.41-79
changelog:
  - Update to CKBI 2.41 from NSS 3.53.0
  -    Removing:
  -     # Certificate "AddTrust Low-Value Services Root"
  -     # Certificate "AddTrust External Root"
  -     # Certificate "UTN USERFirst Email Root CA"
  -     # Certificate "Certplus Class 2 Primary CA"
  -     # Certificate "Deutsche Telekom Root CA 2"
  -     # Certificate "Staat der Nederlanden Root CA - G2"
  -     # Certificate "Swisscom Root CA 2"
  -     # Certificate "Certinomis - Root CA"
  -    Adding:
  -     # Certificate "Entrust Root Certification Authority - G4"
  - fix permissions on ghosted files.


author: Bob Relyea <rrelyea@redhat.com> - 2021.2.48-71
changelog:
  - Update to CKBI 2.48 from NSS 3.66
  -    Removing:
  -     # Certificate "Verisign Class 3 Public Primary Certification Authority - G3"
  -     # Certificate "GeoTrust Global CA"
  -     # Certificate "GeoTrust Universal CA"
  -     # Certificate "GeoTrust Universal CA 2"
  -     # Certificate "QuoVadis Root CA"
  -     # Certificate "Sonera Class 2 Root CA"
  -     # Certificate "Taiwan GRCA"
  -     # Certificate "GeoTrust Primary Certification Authority"
  -     # Certificate "thawte Primary Root CA"
  -     # Certificate "VeriSign Class 3 Public Primary Certification Authority - G5"
  -     # Certificate "GeoTrust Primary Certification Authority - G3"
  -     # Certificate "thawte Primary Root CA - G2"
  -     # Certificate "thawte Primary Root CA - G3"
  -     # Certificate "GeoTrust Primary Certification Authority - G2"
  -     # Certificate "VeriSign Universal Root Certification Authority"
  -     # Certificate "VeriSign Class 3 Public Primary Certification Authority - G4"
  -     # Certificate "Trustis FPS Root CA"
  -     # Certificate "EE Certification Centre Root CA"
  -     # Certificate "LuxTrust Global Root 2"
  -     # Certificate "Symantec Class 1 Public Primary Certification Authority - G4"
  -     # Certificate "Symantec Class 2 Public Primary Certification Authority - G4"
  -    Adding:
  -     # Certificate "Microsoft ECC Root Certificate Authority 2017"
  -     # Certificate "Microsoft RSA Root Certificate Authority 2017"
  -     # Certificate "e-Szigno Root CA 2017"
  -     # Certificate "certSIGN Root CA G2"
  -     # Certificate "Trustwave Global Certification Authority"
  -     # Certificate "Trustwave Global ECC P256 Certification Authority"
  -     # Certificate "Trustwave Global ECC P384 Certification Authority"
  -     # Certificate "NAVER Global Root Certification Authority"
  -     # Certificate "AC RAIZ FNMT-RCM SERVIDORES SEGUROS"
  -     # Certificate "GlobalSign Secure Mail Root R45"
  -     # Certificate "GlobalSign Secure Mail Root E45"
  -     # Certificate "GlobalSign Root R46"
  -     # Certificate "GlobalSign Root E46"
  -     # Certificate "GLOBALTRUST 2020"
  -     # Certificate "ANF Secure Server Root CA"
  -     # Certificate "Certum EC-384 CA"
  -     # Certificate "Certum Trusted Root CA"


author: Boris Ranto <branto@redhat.com> - 1:10.2.5-1
changelog:
  - New version (1:10.2.5-1)
  - Makefile: Fix dencoder build
  - Add fake fcgiapp.h for rgw
  - common: Build more files of libcommon in client
  - libradosstripper: Build libradostripper for rados as noinst


author: Petr Lautrbach <plautrba@redhat.com> - 2.5-3
changelog:
  - Fix typos in test/dispol
  - Set flex as default lexer
  - Fix checkmodule output message
  - Build policy on systems not supporting DCCP protocol
  - Fail if module name different than output base filename


author: Vit Mojzis <vmojzis@redhat.com> - 2.5-6
changelog:
  - Add ibendport ocontext handling
  - Add support for ibendportcon labels
  - Add ibpkey ocontext handling
  - Add support for ibpkeycon labels
  - Add binary module support for xperms


author: Paul Wouters <pwouters@redhat.com> - 1.4.2-8
changelog:
  - Resolves: rhbz#CVE-2015-6496
  - Fold in upstream patches since 1.4.2 release up to git 900d7e8
  - Fold in upstream patch set of 2015-08-18 for coverity issues


author: Paul Wouters <pwouters@redhat.com> - 1.4.4-3
changelog:
  - Resolves: rhbz#1425552 (explicitely Require: libnetfilter_conntrack >= 1.0.6 as it is same .so version)


author: Paul Wouters <pwouters@redhat.com> - 1.4.4-4
changelog:
  - Resolves: rhbz#1578059 Greatest NVR version of conntrack-tools for ppc64le and x86_64 are different


author: Phil Sutter <psutter@redhat.com> - 1.4.4-5
changelog:
  - Add git commit info to IPv6 NAT support patch
  - Backport: conntrackd: helpers: dhcpv6: Fix potential array overrun
  - Backport: nfct: Drop dead code in nfct_timeout_parse_params()
  - Backport: src: Fix for implicit-fallthrough warnings


author: Dan Walsh <dwalsh@fedoraproject.org> - 2.76-1
changelog:
  - Allow containers to use fuse file systems by default
  - Allow containers to sendto dgram socket of container runtimes
  - Needed to run container runtimes in notify socket unit files.


author: Sebastiaan van Stijn <thajeztah@docker.com> - 1.2.11-3.2
changelog:
  - Update Golang runtime to 1.12.15, which includes fixes in the net/http package
    and the runtime on ARM64


author: Derek McGowan <derek@docker.com> - 1.2.12-3.1
changelog:
  - Update the runc vendor to v1.0.0-rc10 which includes a mitigation for
    CVE-2019-19921.
  - Update the opencontainers/selinux which includes a mitigation for
    CVE-2019-16884.
  - Update Golang runtime to 1.12.16, mitigating the CVE-2020-0601
    certificate verification bypass on Windows, and CVE-2020-7919,
    which only affects 32-bit architectures.
  - A fix to prevent SIGSEGV when starting containerd-shim
  - Fix to prevent high system load/CPU utilization with liveness and readiness
    probes
  - Fix to prevent docker exec hanging if an earlier docker exec left a zombie
    process
  - CRI: Update the gopkg.in/yaml.v2 vendor to v2.2.8 with a mitigation for
    CVE-2019-11253


author: Sebastiaan van Stijn <thajeztah@docker.com> - 1.2.13-3.1
changelog:
  - Update to containerd 1.2.13, which fixes a regression introduced in v1.2.12
    that caused container/shim to hang on single core machines, and fixes an issue
    with blkio.
  - Update Golang runtime to 1.12.17.


author: Sebastiaan van Stijn <thajeztah@docker.com> - 1.2.13-3.2
changelog:
  - Build packages for RHEL-7 on s390x, CentOS 8, and Fedora 32
  - Add libseccomp as required dependency


author: Zdenek Pavlas <zpavlas@redhat.com> - 0.9.9-21
changelog:
  - update to latest HEAD
  - don't BuildRequire bash-completion in rhel
  - Fail for bad compress-type options to modifyrepo, like createrepo. BZ 886589
  - Fix options documentation. BZ 892657.
  - modifyrepo: fix --compress option bug. BZ 950724
  - modifyrepo: add --checksum and --{unique,simple}-md-filenames options


author: Valentina Mukhamedzhanova <vmukhame@redhat.com> - 0.9.9-24
changelog:
  - mergerepo: merge package versions from multiple repos.
  - Related: bug#1178763
  - Close lock file before unlink().
  - Related: bug#1256216


author: Valentina Mukhamedzhanova <vmukhame@redhat.com> - 0.9.9-26
changelog:
  - Make sure filename doesn't already contain a checksum.
  - Resolves: bug#1270784
  - Catch IOErrors when loading pkglist.
  - Resolves: bug#1083182
  - Add missing options to the manpage.
  - Resolves: bug#1285761


author: Valentina Mukhamedzhanova <vmukhame@redhat.com> - 0.9.9-27
changelog:
  - Fix temporary files cleanup.
  - Resolves: bug#1406418
  - Fix --update for pkgs with same nevra.
  - Resolves: bug#1404239


author: Valentina Mukhamedzhanova <vmukhame@redhat.com> - 0.9.9-28
changelog:
  - createrepo: allow xz and bz2 for xml files.
  - Resolves: bug#1125437
  - modifyrepo: fix handling of already compressed input.
  - Resolves: bug#1227782
  - modifyrepo: handle empty file with LZMA.
  - Resolves: bug#1287685
  - modifyrepo: docs: remove compat compress type.
  - Resolves: bug#1287714


author: Stephen Augustus <saugustus@vmware.com> - 1.15.1
changelog:
  - Source cri-tools from https://github.com/kubernetes-sigs/cri-tools
    instead of https://github.com/kubernetes-incubator/cri-tools


author: Stephen Augustus <saugustus@vmware.com> - 1.15.1
changelog:
  - Bump minimum versions of all kubernetes dependencies
  - Remove conditional logic for unsupported versions of Kubernetes


author: Ondrej Kozina <okozina@redhat.com> - 1.7.4-4
changelog:
  - patch: fix regression in blockwise functions
  - patch: avoid repeating error messages when device holders
    detected.
  - patch: add option to cryptsetup-reencrypt to print progress
    log sequentaly
  - patch: use --progress-frequency in reencryption dracut module
  - Resolves: #1480006 #1447632 #1479857


author: Ondrej Kozina <okozina@redhat.com> - 2.0.3-2
changelog:
  - patch: stop LUKS2 auto-recovery if device is no longer LUKS
    type
  - patch: update cryptsetup man page for --type option
  - patch: rephrase error message for invalid --type option in
    convert action
  - Resolves: #1599281 #1601477 #1601481


author: Ondrej Kozina <okozina@redhat.com> - 2.0.3-3
changelog:
  - Add expected permissions explicitly for locking directory.
  - Reinstate sed script removing library rpath from libtool
    script due to bug in upstream sources distribution.
  - Resolves: #1609847 #1610379


author: Ondrej Kozina <okozina@redhat.com> - 2.0.3-4
changelog:
  - patch: Fix broken LUKS2 api test.
  - patch: Allow cryptsetup to process all LUKS2 metadata variants
    according to LUKS2 specifiation.
  - Resolves: #1653388


author: Ondrej Kozina <okozina@redhat.com> - 2.0.3-5
changelog:
  - patch: calculate alignment offset correctly for LUKS2 devices.
  - patch: fix memory leak in LUKS2 validation.
  - Resolves: #1613953 #1693592


author: Zdenek Dohnal <zdohnal@redhat.com> - 1:1.6.3-44
changelog:
  - 1774460 - CVE-2019-8696 cups: stack-buffer-overflow in libcups's asn1_get_packed function [rhel-7]
  - 1774461 - CVE-2019-8675 cups: stack-buffer-overflow in libcups's asn1_get_type function [rhel-7]
  - 1753809 - Settings in ~/.cups/client.conf aren't used


author: Zdenek Dohnal <zdohnal@redhat.com> - 1:1.6.3-46
changelog:
  - 1715907 - CUPS- client: cupsGetPPD3() function tries to load PPD from IPP printer and not from the CUPS queue


author: Jonathan Dieter <jdieter@lesbg.com> - 3.6-0.13.20130520git
changelog:
  - Clearer error message when applydeltaiso fails (#825428) (Thanks, John!)
  - Add details to applydeltaiso and makedeltaiso man pages (#569499)
  - Add fragiso man page to deltaiso package (#569776)
  - Fix section for applydeltaiso (#548970)
  - Add arch-specific requires (#677060)


author: Jonathan Dieter <jdieter@lesbg.com> - 3.6-1
changelog:
  - Update to 3.6 which, among other things, fixes a bug when applying a deltarpm
    to create a gzip-compressed rpm using full compression


author: Marian Csontos <mcsontos@redhat.com> - 7:2.02.187-6.el7_9.2
changelog:
  - Fix dmeventd crash with modified reserved_stack configuration option.
  - Fix lvm crashing when .cache file is changed by external tools.


author: Peter Rajnoha <prajnoha@redhat.com> - 0.7.0-0.1-rc6
changelog:
  - Don't open devices as writeable if --clear-needs-check-flag is not set.
  - Fix cache metadata format version 2 superblock packing.


author: Marian Csontos <mcsontos@redhat.com> - 0.7.2-1
changelog:
  - Update to latest upstream release including various bug fixes and new features.
  - Fix segfault when dump tools are given a tiny metadata file.
  - Fix -V exiting with 1.
  - Fix thin_check when running on XML dump instead of binary data.
  - Speed up free block searches.


author: Marian Csontos <mcsontos@redhat.com> - 0.7.3-1
changelog:
  - Update to latest bugfix and documentation update release.
  - *_restore tools wipe superblock as a last resort.
  - Add thin_check --override-mapping-root.


author: Jindrich Novy <jnovy@redhat.com> - 0.4.1-3
changelog:
  - temporarily remove s390x arch from supported arches due to
    missing renameat2 syscall
  - Related: #1721151


author: Jindrich Novy <jnovy@redhat.com> - 0.7.2-5
changelog:
  - upstream patch when applied to the 0.7.2 source code is applied to the wrong function,
    new patch fixes it
  - Resolves: #1805013


author: Jindrich Novy <jnovy@redhat.com> - 0.7.2-6
changelog:
  - fix "Pushing container image built with rootless podman fails with: "file integrity checksum failed""
  - Resolves: #1810498


author: Dave Dykstra <dwd@fedoraproject.org> - 3.4.2-4
changelog:
  - Bump release number in order to larger than a rebuild of fuse package
    done before separation pull request was merged.


author: Nikos Mavrogiannopoulos <nmav@redhat.com> 3.3.8-9
changelog:
  - Amended fix for FIPS enforcement issue (#1163848)
  - Fixed issue with applications that close all file descriptors (#1165047)


author: Nikos Mavrogiannopoulos <nmav@redhat.com> 3.3.8-11
changelog:
  - Applied fix for urandom FD in FIPS140 mode (#1165047)
  - Applied fix for FIPS140-2 related regression (#1110696)


author: Nikos Mavrogiannopoulos <nmav@redhat.com> 3.3.8-13
changelog:
  - Corrected reseed and respect of max_number_of_bits_per_request in 
    FIPS140-2 mode. Also enhanced the initial tests. (#1228199)


author: Nikos Mavrogiannopoulos <nmav@redhat.com> 3.3.24-1
changelog:
  - Addressed issue with DSA public keys smaller than 2^1024 (#1238279)
  - Addressed two-byte buffer overflow in the DTLS-0.9 protocol (#1209365)
  - When writing certificates to smart cards write the CKA_ISSUER and
    CKA_SERIAL_NUMBER fields to allow NSS reading them (#1272179)
  - Use the shared system certificate store (#1110750)
  - Address MD5 transcript collision attacks in TLS key exchange (#1289888, 
    CVE-2015-7575)
  - Allow hashing data over 2^32 bytes (#1306953)
  - Ensure written PKCS#11 public keys are not marked as private (#1339453)
  - Ensure secure_getenv() is called on all uses of environment variables
    (#1344591).
  - Fix issues related to PKCS #11 private key listing on certain HSMs
    (#1351389)


author: Nikos Mavrogiannopoulos <nmav@redhat.com> 3.3.26-7
changelog:
  - Address interoperability issue with 3.5.x (#1388932)
  - Reject CAs which are both trusted and blacklisted in trust module (#1375303)
  - Added new functions to set issuer and subject ID in certificates (#1378373)
  - Reject connections with less than 1024-bit DH parameters (#1335931)
  - Fix issue that made GnuTLS parse only the first 32 extensions (#1383748)
  - Mention limitations of certtool in manpage (#1375463)
  - Read PKCS#8 files with HMAC-SHA256 -as generated by openssl 1.1 (#1380642)
  - Do not link directly to trousers but instead use dlopen (#1379739)
  - Fix incorrect OCSP validation (#1377569)
  - Added support for pin-value in PKCS#11 URIs (#1379283)
  - Added the --id option to p11tool (#1399232)
  - Improved sanity checks in RSA key generation (#1444780)
  - Addressed CVE-2017-5334, CVE-2017-5335, CVE-2017-5336, CVE-2017-5337,
    CVE-2017-7869


author: Nikos Mavrogiannopoulos <nmav@redhat.com> 3.3.26-9
changelog:
  - Address crash in OCSP status request extension, by eliminating the
    unneeded parsing (CVE-2017-7507, #1455828)


author: Anderson Sasaki <ansasaki@redhat.com> 3.3.29-8
changelog:
  - Backported --sni-hostname option which allows overriding the hostname
    advertised to the peer (#1444792)
  - Improved counter-measures in TLS CBC record padding for lucky13 attack
    (CVE-2018-10844, #1589704, CVE-2018-10845, #1589707)
  - Added counter-measures for "Just in Time" PRIME + PROBE cache-based attack
    (CVE-2018-10846, #1589708)
  - Address p11tool issue in object deletion in batch mode (#1375307)
  - Backport PKCS#11 tests from master branch. Some tests were disabled due to
    unsupported features in 3.3.x (--load-pubkey and --test-sign options, ECC key
    generation without login, and certificates do not inherit ID from the private
    key)
  - p11tool explicitly marks certificates and public keys as NOT private objects
    and private keys as private objects
  - Enlarge buffer size to support resumption with large keys (#1542461)
  - Legacy HMAC-SHA384 cipher suites were disabled by default
  - Added DSA key generation to p11tool (#1464896)
  - Address session renegotiation issue using client certificate (#1434091)
  - Address issue when importing private keys into Atos HSM (#1460125)


author: Mukundan Ragavan <nonamedotc@fedoraproject.org> - 2.1.0-1
changelog:
  - Update to 2.1.0
  - Spec cleanup
  - drop unused configure options
  - Install desktop file (fixes bz#1541785)


author: Thomas Woerner <twoerner@redhat.com> - 6.19-5
changelog:
  - New service sub package to provide the ipset service (RHBZ#1136257)
    Service and start-stop script from F-24
  - Fixed ipset package summary (RHBZ#1195171)
    Spec file derived from F-24


author: Thomas Woerner <twoerner@redhat.com> - 6.19-6
changelog:
  - Use /etc/sysconfig/ipset-config in service as EnvironmentFile (RHBZ#1136257)
  - Use /etc/sysconfig/ipset for data as in RHEL-6 (RHBZ#1136257)
  - No save on reload, but legacy save action (RHBZ#1136257)


author: Thomas Woerner <twoerner@redhat.com> - 6.29-1
changelog:
  - Rebase to 6.29 (RHBZ#1351299)
  - Fixes:
    - Backport ipset capability to run in namespaces (RHBZ#1226051)
    - Fix service save with empty ipset list and existing ipset save file
      (RHBZ#1377621)
    - Fix internal error at printing to output buffer (RHBZ#1395865)


author: Stefano Brivio <sbrivio@redhat.com> - 6.38-1
changelog:
  - Rebase to 6.38 (RHBZ#1557600):
    - hash:ipmac type support added to ipset, userspace part (Tomasz Chilinski)
  - Refactor /etc/sysconfig/ipset.start-stop
  - Fixes:
    - IPSet Service Monolithic Operation (RHBZ#1440741)
    - "systemctl start ipset" doesn't handle existing ipset's having counters
      (RHBZ#1502212)


author: Stefano Brivio <sbrivio@redhat.com> - 7.1-1
changelog:
  - Rebase to 7.1 (RHBZ#1649080):
    - Add compatibility support for strscpy()
    - Correct the manpage about the sort option
    - Add missing functions to libipset.map
    - configure.ac: Fix build regression on RHEL/CentOS/SL (Serhey Popovych)
    - Implement sorting for hash types in the ipset tool
    - Fix to list/save into file specified by option (reported by Isaac Good)
    - Introduction of new commands and protocol version 7, updated kernel include files
    - Add compatibility support for async in pernet_operations
    - Use more robust awk patterns to check for backward compatibility
    - Prepare the ipset tool to handle multiple protocol version
    - Fix warning message handlin
    - Correct to test null valued entry in hash:net6,port,net6 test
    - Library reworked to support embedding ipset completely
    - Add compatibility to support kvcalloc()
    - Validate string type attributes in attr2data() (Stefano Brivio)
    - manpage: Add comment about matching on destination MAC address (Stefano Brivio)
      (RHBZ#1649079)
    - Add compatibility to support is_zero_ether_addr()
    - Fix use-after-free in ipset_parse_name_compat() (Stefano Brivio) (RHBZ#1649073)
    - Fix leak in build_argv() on line parsing error (Stefano Brivio) (RHBZ#1649073)
    - Simplify return statement in ipset_mnl_query() (Stefano Brivio) (RHBZ#1649073)
    - tests/check_klog.sh: Try dmesg too, don't let shell terminate script (Stefano Brivio) 
  - Fixes:
    - Fix all shellcheck warnings in init script (RHBZ#1649073)
    - Make error reporting consistent, introduce different severities (RHBZ#1649877)
    - While restoring, on invalid entries, remove them and retry (RHBZ#1650297)
    - Fix covscan SC2166 warning in init script (RHBZ#1649073)
    - Hardcode triggerin, triggerun versions for ipset-service (RHBZ#1646666)


author: Chris Leech <cleech@redhat.com> - 6.2.0.874-12
changelog:
  - 1389071 handle newer ISCSI_ERR_NOP_TIMEDOUT code from the kernel
  - 1624670 Login negotiation failed due to CHAP_N values do not match
            (rec update race condition)


author: Chris Leech <cleech@redhat.com> - 6.2.0.874-17
changelog:
  - 1518367 boot from iSCSI not establishing all sessions persistently
  - 1667965 A manual restart of iscsi.service modifies records node.startup value


author: Rado Vrbovsky <rvrbovsk@redhat.com> [3.10.0-1160.44.1.el7]
changelog:
  - fs: dlm: change handling of reconnects (Bob Peterson) [1834878]
  - DLM: fix NULL pointer dereference in send_to_sock() (Bob Peterson) [1834878]
  - DLM: fix to reschedule rwork (Bob Peterson) [1834878]
  - DLM: fix to use sk_callback_lock correctly (Bob Peterson) [1834878]
  - DLM: fix overflow dlm_cb_seq (Bob Peterson) [1834878]
  - DLM: fix conversion deadlock when DLM_LKF_NODLCKWT flag is set (Bob Peterson) [1834878]
  - DLM: use CF_CLOSE flag to stop dlm_send correctly (Bob Peterson) [1834878]
  - DLM: Reanimate CF_WRITE_PENDING flag (Bob Peterson) [1834878]
  - DLM: fix race condition between dlm_recoverd_stop and dlm_recoverd (Bob Peterson) [1834878]
  - DLM: close othercon at send/receive error (Bob Peterson) [1834878]
  - DLM: retry rcom when dlm_wait_function is timed out. (Bob Peterson) [1834878]
  - DLM: fix to use sock_mutex correctly in xxx_accept_from_sock (Bob Peterson) [1834878]
  - DLM: fix race condition between dlm_send and dlm_recv (Bob Peterson) [1834878]
  - DLM: fix double list_del() (Bob Peterson) [1834878]
  - DLM: Eliminate CF_WRITE_PENDING flag (Bob Peterson) [1834878]
  - KVM: do not allow mapping valid but non-reference-counted pages (Jon Maloy) [1975511]
  - vxlan: check return value of gro_cells_init() (Aristeu Rozanski) [1970618]
  - KVM: PPC: Book3S: Fix H_RTAS rets buffer overflow (Jon Maloy) [1988218] {CVE-2021-37576}


author: Rado Vrbovsky <rvrbovsk@redhat.com> [3.10.0-1160.45.1.el7]
changelog:
  - CI: handle RT branches in a single config (Veronika Kabatova)
  - CI: Drop private CI config (Veronika Kabatova)
  - CI: extend template use (Veronika Kabatova)
  - mm: page_counter: mitigate consequences of a page_counter underflow (Scott Wood) [2000973]
  - KVM: nSVM: always intercept VMLOAD/VMSAVE when nested(CVE-2021-3656) (Jon Maloy) [1985425] {CVE-2021-3656}
  - KVM: x86: Update vCPU's hv_clock before back to guest when tsc_offset is adjusted (Marcelo Tosatti) [1991856]
  - KVM: nSVM: avoid picking up unsupported bits from L2 in int_ctl (CVE-2021-3653) (Jon Maloy) [1985408] {CVE-2021-3653}
  - scsi: qedf: Initiate cleanup for ELS commands as well (Nilesh Javali) [1982702]


author: Rado Vrbovsky <rvrbovsk@redhat.com> [3.10.0-1160.46.1.el7]
changelog:
  - RDMA/ucma: Rework ucma_migrate_id() to avoid races with destroy (Kamal Heib) [1978075] {CVE-2020-36385}
  - RDMA/ucma: Fix locking for ctx->events_reported (Kamal Heib) [1978075] {CVE-2020-36385}
  - RDMA/ucma: Fix the locking of ctx->file (Kamal Heib) [1978075] {CVE-2020-36385}
  - RDMA/cma: Add missing locking to rdma_accept() (Kamal Heib) [1978075] {CVE-2020-36385}
  - RDMA/ucma: Add missing locking around rdma_leave_multicast() (Kamal Heib) [1978075] {CVE-2020-36385}
  - RDMA/ucma: Put a lock around every call to the rdma_cm layer (Kamal Heib) [1978075] {CVE-2020-36385}
  - nvme-pci: Unblock reset_work on IO failure (Gopal Tiwari) [1981610]
  - nvme-pci: Don't disable on timeout in reset state (Gopal Tiwari) [1981610]
  - nvme-pci: shutdown on timeout during deletion (Gopal Tiwari) [1981610]


author: Rado Vrbovsky <rvrbovsk@redhat.com> [3.10.0-1160.47.1.el7]
changelog:
  - PCI: hv: Fix sleep while in non-sleep context when removing child devices from the bus (Mohammed Gamal) [1948961]
  - PCI: hv: Remove bus device removal unused refcount/functions (Mohammed Gamal) [1948961]
  - PCI: hv: Fix a race condition when removing the device (Mohammed Gamal) [1948961]
  - scsi: qla2xxx: Fix use after free in eh_abort path (Nilesh Javali) [1899599]


author: Rado Vrbovsky <rvrbovsk@redhat.com> [3.10.0-1160.48.1.el7]
changelog:
  - scsi: qedf: Add check to synchronize abort and flush (Nilesh Javali) [1941766]
  - scsi: ibmvfc: Reinit target retries (Desnes A. Nunes do Rosario) [1882627]
  - scsi: ibmvfc: Avoid move login if fast fail is enabled (Desnes A. Nunes do Rosario) [1882627]
  - scsi: ibmvfc: Handle move login failure (Desnes A. Nunes do Rosario) [1882627]
  - scsi: ibmvfc: Avoid link down on FS9100 canister reboot (Desnes A. Nunes do Rosario) [1882627]
  - scsi: ibmvfc: don't check for failure from mempool_alloc() (Desnes A. Nunes do Rosario) [1882627]
  - scsi: ibmvfc: Use compiler attribute defines instead of __attribute__() (Desnes A. Nunes do Rosario) [1882627]
  - scsi: ibmvfc: fix misdefined reserved field in ibmvfc_fcp_rsp_info (Desnes A. Nunes do Rosario) [1882627]


author: Rado Vrbovsky <rvrbovsk@redhat.com> [3.10.0-1160.50.1.el7]
changelog:
  - tcp: grow window for OOO packets only for SACK flows (Guillaume Nault) [1990665]
  - scsi: mpt3sas: Fix unlock imbalance (Tomas Henzl) [2006536]
  - pci-hyperv: Fix setting CPU affinity on Azure (Vitaly Kuznetsov) [2019272]
  - media: firewire: firedtv-avc: fix a buffer overflow in avc_ca_pmt() (Lucas Zampieri) [1956471] {CVE-2021-42739}


author: Rado Vrbovsky <rvrbovsk@redhat.com> [3.10.0-1160.51.1.el7]
changelog:
  - mm, fs: Fix do_generic_file_read() error return (Carlos Maiolino) [2020857]
  - perf/core: Fix a memory leak in perf_event_parse_addr_filter() (Michael Petlan) [1901932]


author: Rado Vrbovsky <rvrbovsk@redhat.com> [3.10.0-1160.52.1.el7]
changelog:
  - acpi-cpufreq: Honor _PSD table setting on new AMD CPUs (David Arcari) [2019588]
  - x86/cpu/amd: Call init_amd_zn() om Family 19h processors too (David Arcari) [2019218]
  - x86/cpu/AMD: Fix erratum 1076 (CPB bit) (David Arcari) [2019218]
  - i40e: Fix the conditional for i40e_vc_validate_vqs_bitmaps (Stefan Assmann) [1977246]
  - i40e: Fix virtchnl_queue_select bitmap validation (Stefan Assmann) [1977246]


author: Rado Vrbovsky <rvrbovsk@redhat.com> [3.10.0-1160.53.1.el7]
changelog:
  - fuse: fix live lock in fuse_iget() (Miklos Szeredi) [1952046]
  - fuse: fix bad inode (Miklos Szeredi) [1952046]
  - GFS2: Truncate address space mapping when deleting an inode (Bob Peterson) [1364234]
  - gfs2: Fix gfs2_testbit to use clone bitmaps (Bob Peterson) [1364234]
  - gfs2: clear buf_in_tr when ending a transaction in sweep_bh_for_rgrps (Bob Peterson) [1364234]
  - gfs2: Fix oversight in gfs2_ail1_flush (Bob Peterson) [1364234]
  - gfs2: Additional information when gfs2_ail1_flush withdraws (Bob Peterson) [1364234]
  - gfs2: leaf_dealloc needs to allocate one more revoke (Bob Peterson) [1364234]
  - gfs2: allow journal replay to hold sd_log_flush_lock (Bob Peterson) [1364234]
  - gfs2: don't allow releasepage to free bd still used for revokes (Bob Peterson) [1364234]
  - gfs2: flesh out delayed withdraw for gfs2_log_flush (Bob Peterson) [1364234]
  - gfs2: Do proper error checking for go_sync family of glops functions (Bob Peterson) [1364234]
  - gfs2: drain the ail2 list after io errors (Bob Peterson) [1364234]
  - gfs2: Withdraw in gfs2_ail1_flush if write_cache_pages fails (Bob Peterson) [1364234]
  - gfs2: Do log_flush in gfs2_ail_empty_gl even if ail list is empty (Bob Peterson) [1364234]
  - gfs2: Check for log write errors before telling dlm to unlock (Bob Peterson) [1364234]
  - gfs2: Prepare to withdraw as soon as an IO error occurs in log write (Bob Peterson) [1364234]
  - gfs2: Issue revokes more intelligently (Bob Peterson) [1364234]
  - gfs2: Add verbose option to check_journal_clean (Bob Peterson) [1364234]
  - gfs2: fix infinite loop when checking ail item count before go_inval (Bob Peterson) [1364234]
  - gfs2: Force withdraw to replay journals and wait for it to finish (Bob Peterson) [1364234]
  - gfs2: Allow some glocks to be used during withdraw (Bob Peterson) [1364234]
  - gfs2: move check_journal_clean to util.c for future use (Bob Peterson) [1364234]
  - gfs2: Ignore dlm recovery requests if gfs2 is withdrawn (Bob Peterson) [1364234]
  - gfs2: Only complain the first time an io error occurs in quota or log (Bob Peterson) [1364234]
  - gfs2: log error reform (Bob Peterson) [1364234]
  - gfs2: Rework how rgrp buffer_heads are managed (Bob Peterson) [1364234]
  - gfs2: clear ail1 list when gfs2 withdraws (Bob Peterson) [1364234]
  - gfs2: Introduce concept of a pending withdraw (Bob Peterson) [1364234]
  - gfs2: Return bool from gfs2_assert functions (Bob Peterson) [1364234]
  - gfs2: Turn gfs2_consist into void functions (Bob Peterson) [1364234]
  - gfs2: Remove usused cluster_wide arguments of gfs2_consist functions (Bob Peterson) [1364234]
  - gfs2: Report errors before withdraw (Bob Peterson) [1364234]
  - gfs2: Split gfs2_lm_withdraw into two functions (Bob Peterson) [1364234]
  - gfs2: Fix incorrect variable name (Bob Peterson) [1364234]
  - gfs2: Don't write log headers after file system withdraw (Bob Peterson) [1364234]
  - gfs2: clean up iopen glock mess in gfs2_create_inode (Bob Peterson) [1364234]
  - gfs2: Close timing window with GLF_INVALIDATE_IN_PROGRESS (Bob Peterson) [1364234]
  - gfs2: fix infinite loop in gfs2_ail1_flush on io error (Bob Peterson) [1364234]
  - gfs2: Introduce function gfs2_withdrawn (Bob Peterson) [1364234]
  - gfs2: replace more printk with calls to fs_info and friends (Bob Peterson) [1364234]
  - gfs2: dump fsid when dumping glock problems (Bob Peterson) [1364234]
  - gfs2: simplify gfs2_freeze by removing case (Bob Peterson) [1364234]
  - gfs2: Rename SDF_SHUTDOWN to SDF_WITHDRAWN (Bob Peterson) [1364234]
  - gfs2: Warn when a journal replay overwrites a rgrp with buffers (Bob Peterson) [1364234]
  - gfs2: log which portion of the journal is replayed (Bob Peterson) [1364234]
  - gfs2: slow the deluge of io error messages (Bob Peterson) [1364234]
  - gfs2: Don't withdraw under a spin lock (Bob Peterson) [1364234]
  - GFS2: Clear gl_object when deleting an inode in gfs2_delete_inode (Bob Peterson) [1364234]
  - gfs2: Use fs_* functions instead of pr_* function where we can (Bob Peterson) [1364234]
  - GFS2: Use pr_<level> more consistently (Bob Peterson) [1364234]


author: Alan Bartlett <ajb@elrepo.org> - 5.4.121-1
changelog:
  - Updated with the 5.4.121 source tarball.
  - [https://www.kernel.org/pub/linux/kernel/v5.x/ChangeLog-5.4.121]


author: Alan Bartlett <ajb@elrepo.org> - 5.4.122-1
changelog:
  - Updated with the 5.4.122 source tarball.
  - [https://www.kernel.org/pub/linux/kernel/v5.x/ChangeLog-5.4.122]


author: Alan Bartlett <ajb@elrepo.org> - 5.4.123-1
changelog:
  - Updated with the 5.4.123 source tarball.
  - [https://www.kernel.org/pub/linux/kernel/v5.x/ChangeLog-5.4.123]


author: Alan Bartlett <ajb@elrepo.org> - 5.4.124-1
changelog:
  - Updated with the 5.4.124 source tarball.
  - [https://www.kernel.org/pub/linux/kernel/v5.x/ChangeLog-5.4.124]


author: Alan Bartlett <ajb@elrepo.org> - 5.4.125-1
changelog:
  - Updated with the 5.4.125 source tarball.
  - [https://www.kernel.org/pub/linux/kernel/v5.x/ChangeLog-5.4.125]


author: Alan Bartlett <ajb@elrepo.org> - 5.4.126-1
changelog:
  - Updated with the 5.4.126 source tarball.
  - [https://www.kernel.org/pub/linux/kernel/v5.x/ChangeLog-5.4.126]


author: Alan Bartlett <ajb@elrepo.org> - 5.4.127-1
changelog:
  - Updated with the 5.4.127 source tarball.
  - [https://www.kernel.org/pub/linux/kernel/v5.x/ChangeLog-5.4.127]


author: Alan Bartlett <ajb@elrepo.org> - 5.4.128-1
changelog:
  - Updated with the 5.4.128 source tarball.
  - [https://www.kernel.org/pub/linux/kernel/v5.x/ChangeLog-5.4.128]


author: Alan Bartlett <ajb@elrepo.org> - 5.4.129-1
changelog:
  - Updated with the 5.4.129 source tarball.
  - [https://www.kernel.org/pub/linux/kernel/v5.x/ChangeLog-5.4.129]


author: Alan Bartlett <ajb@elrepo.org> - 5.4.130-1
changelog:
  - Updated with the 5.4.130 source tarball.
  - [https://www.kernel.org/pub/linux/kernel/v5.x/ChangeLog-5.4.130]


author: David Howells <dhowells@redhat.com>
changelog:
  - Adjust the manual page for 'keyctl unlink' to show keyring is optional.
  - Add --version support for the keyutils version and build date.


author: David Howells <dhowells@redhat.com> - 1.5.4-1
changelog:
  - Fix the keyctl padd command and similar to handle binary input.
  - Make keyctl show able to take a keyring to dump.
  - Make keyctl show able to take a flag to request hex key IDs.
  - Make keyctl show print the real ID of the root keyring.


author: David Howells <dhowells@redhat.com> - 1.5.6-1
changelog:
  - Fix the request-key.conf.5 manpage.
  - Fix the max depth of key tree dump (keyctl show) [BZ 1002761].
  - The input buffer size for keyctl padd and pinstantiate should be larger [BZ 1002761].
  - Add keyctl_invalidate.3 manpage [BZ 1002761].


author: David Howells <dhowells@redhat.com> - 1.5.7-1
changelog:
  - Provide a utility function to find a key by type and name.
  - Allow keyctl commands to take a type+name arg instead of a key-id arg.
  - Add per-UID get_persistent keyring function [BZ 1014739].


author: Yauheni Kaliuta <ykaliuta@redhat.com> - 20-17
changelog:
  - libkmod-elf: resolve CRC if module is built with MODULE_REL_CRCS.
  - weak-modules: process only weak-updates related depmod output.
    Resolves: rhbz#1468305
  - weak-modules: implement dry run by symlink restoration.
    Resolves: rhbz#1477073


author: Yauheni Kaliuta <ykaliuta@redhat.com> - 20-18
changelog:
  - depmod: external directories support.
    Resolves: rhbz#1361857
  - BuildRequires automake autoconf libtool.


author: Yauheni Kaliuta <ykaliuta@redhat.com> - 20-20
changelog:
  - weak-modules: use function to generate weak_updates_dir
  - weak-modules: implement dry-run on the tempdir
    Resolves: rhbz#1510058


author: Yauheni Kaliuta <ykaliuta@redhat.com> - 20-23
changelog:
  - weak-modules: fix initial state creation for dry-run
  - weak-modules: check compatibility in a temporary directory
    Resolves: rhbz#1619889.


author: Stephen Augustus <saugustus@vmware.com> - 1.18.4
changelog:
  - Source CNI plugins from https://storage.googleapis.com/k8s-artifacts-cni/release
    instead of https://dl.k8s.io/network-plugins


author: Stephen Augustus <saugustus@vmware.com> - 1.18.4
changelog:
  - Source cri-tools from https://storage.googleapis.com/k8s-artifacts-cri-tools/release
    instead of https://github.com/kubernetes-sigs/cri-tools


author: Jeff Moyer <jmoyer@redhat.com> - 0.3.109-8
changelog:
  - Change the source location to the new upstream on fedorahosted
  - import a new tarball from the new source


author: Jeff Moyer <jmoyer@redhat.com> - 0.3.109-10
changelog:
  - Un-revert the RHEL-specific changes. (Jeff Moyer)
  - Make devel sub-package depend on specific ver-rel (Jeff Moyer)
  - Resolves: bz#905462


author: Jeff Moyer <jmoyer@redhat.com> - 0.3.109-12.2
changelog:
  - Get rid of sparc support (we don't build it) (Jeff Moyer)
  - Implement proper support for aarch64 (Jeff Moyer)
  - Resolves: bz#1026429


author: Jakub Hrozek <jhrozek@redhat.com> - 0.5.0.1-25
changelog:
  - Resolves: rhbz#1205557 - Include the latest upstream ding-libs release in 7.2
  - Port the SONAME hack


author: Jakub Hrozek <jhrozek@redhat.com> - 0.5.0.1-27
changelog:
  - Re-add the soname hack
  - Resolves: rhbz#1290382 - Rebase ding-libs to the latest available upstream


author: Michal Židek <mzidek@redhat.com> - 0.6.1-29
changelog:
  - Fix rpmdiff failure for 'Binary stripping'
  - Resolves: rhbz#1480270 - Rebase ding-libs to the latest upstream release


author: Michal Židek <mzidek@redhat.com> - 0.6.1-30
changelog:
  - Adopting to use Downstream Helper for bellow BZ backport
  - Related: rhbz#1507607 - ding-libs: libini_config: `ini_config_augment` reports errors on match failure


author: Michal Židek <mzidek@redhat.com> - 0.6.1-31
changelog:
  - Resolves: rhbz#1507607 - ding-libs: libini_config: `ini_config_augment` reports errors on match failure


author: Michal Židek <mzidek@redhat.com> - 0.6.1-32
changelog:
  - Previous change in spec file broke the application of downstream only patch
  - Related: rhbz#1507607 - ding-libs: libini_config: `ini_config_augment` reports errors on match failure


author: Steve Grubb <sgrubb@redhat.com> 0.7.5-2
changelog:
  - resolves: #1185610 - libcap-ng: update caps table for newer kernels
  - Fix a leaked FD in upstream code


author: Nikola Forró <nforro@redhat.com> - 0.41-12
changelog:
  - resolves: #1406927
    start cgred service after nss-user-lookup target
    show warnings about unsuccessful user/group lookups


author: Nikola Forró <nforro@redhat.com> - 0.41-17
changelog:
  - show warning when "tasks" file can not be opened
  - extend description of "controllers" section in cgrules.conf man page
    resolves: #1561736


author: Steve Dickson <steved@redhat.com> 2.0.14-1
changelog:
  - Updated to latest stable upstream version: 2.0.14-stable (bz 727129)
  - Removed the installion of the outdate man pages and the latex raw docs.
  - Corrected where the other doc are installed.


author: Steve Dickson <steved@redhat.com> 2.0.18-1
changelog:
  - Updated to latest stable upstream version: 2.0.18-stable
  - Moved documentation into its own rpm (bz 810138)


author: Lukas Nykryn <lnykryn@redhat.com> - 219-62
changelog:
  - cryptsetup-generator: introduce basic keydev support (#1619743)
  - cryptsetup-generator: don't return error if target directory already exists (#1619743)
  - cryptsetup-generator: allow whitespace characters in keydev specification (#1619743)
  - Make sure the mount units pulled by 'RequiresMountsFor=' are loaded (if they exist) (#1619743)


author: Lukas Nykryn <lnykryn@redhat.com> - 219-63
changelog:
  - dhcp6: make sure we have enough space for the DHCP6 option header (CVE-2018-15688)
  - journald: do not store the iovec entry for process commandline on stack (#1657788)
  - journald: set a limit on the number of fields (1k) (#1657792)
  - journal-remote: set a limit on the number of fields in a message (#1657792)
  - journald: free cmdline buffers owned by iovec (#1666646)


author: Lukas Nykryn <lnykryn@redhat.com> - 219-64
changelog:
  - detect-virt: do not try to read all of /proc/cpuinfo (#1631531)
  - core: disable the effect of Restart= if there's a stop job pending for a service (#6581) (#1626382)
  - networkd: respect DHCP UseRoutes option (#1663365)
  - networkd: fix dhcp4 link without routes not being considered ready (#8728) (#1663365)
  - networkd: dont crash when mtu changes (#6594) (#1663365)
  - tmpfiles: "e" takes globs (#1641764)
  - tmpfiles: 'e' is supposed to operate on directory only (#1641764)
  - tmpfiles: 'e' is supposed to accept shell-style globs (#1641764)
  - bus-message: do not crash on message with a string of zero length (#1643396)
  - Revert "bus: when dumping string property values escape the chars we use as end-of-line and end-of-item marks" (#1643172)
  - set automount state to waiting when the mount is stopped (#1651257)
  - core: when deserializing state always use read_line(…, LONG_LINE_MAX, …) (CVE-2018-15686)
  - shorten hostname before checking for trailing dot (#1631625)
  - journald: fixed assertion failure when system journal rotation fails (#9893) (#1619543)
  - local-addresses: handle gracefully if routes lack an RTA_OIF attribute (#1627750)
  - rules: fix memory hotplug rule so systemd-detect-virt does not run too often (#1666612)
  - 6647 - use path_startswith("/dev") in cryptsetup (#6732) (#1664695)
  - core: mount-setup: handle non-existing mountpoints gracefully (#1585411)
  - units/rescue.service.in: fix announcement message (#1660422)
  - systemctl: Allow 'edit' and 'cat' on unloaded units (#1649518)
  - main: improve RLIMIT_NOFILE handling (#5795) (#1585913)
  - shared/sleep-config: exclude zram devices from hibernation candidates (#1609816)
  - journalctl: allow --file/--directory with --boot or --list-boots (#1463678)
  - journalct: allow --boot=0 to DTRT with --file/--directory (#1463678)
  - journal-remote: show error message if output file name does not end with .journal (bz#1267552)
  - artificially serialize building of .policy files (#1272485)
  - cryptsetup: add support for sector-size= option (#9936) (#1571801)
  - cryptsetup: do not define arg_sector_size if libgcrypt is v1.x (#9990) (#1571801)
  - journal: fix syslog_parse_identifier() (#1657794)
  - journal: do not remove multiple spaces after identifier in syslog message (#1657794)
  - tmpfiles: change ownership of symlinks too (#1620110)
  - tmpfiles: fix check for figuring out whether to call chmod() (#1620110)
  - shared/install: allow "enable" on linked unit files (#1628575)


author: Lukas Nykryn <lnykryn@redhat.com> - 219-65
changelog:
  - backport fd_is_fs_type (#1663143)
  - backport chase_symlinks (#1663143)
  - fs-util: add new CHASE_SAFE flag to chase_symlinks() (#1663143)
  - fs-util: add new chase_symlinks() flag CHASE_OPEN (#1663143)
  - sd-dameon: also sent ucred when our UID differs from EUID (#1663143)
  - notify: add new --uid= command (#1663143)
  - core: be stricter when handling PID files and MAINPID sd_notify() messages (#1663143)
  - journald: respect KeepFree= as well as MaxUse= values (#1361893)
  - shutdown: in_container was used before its definition (#1693716)
  - core: Fix edge case when processing /proc/self/mountinfo (#1691511)
  - sd-bus: deal with cookie overruns (#1693559)
  - Refuse dbus message paths longer than BUS_PATH_SIZE_MAX limit. (#1667871)
  - Allocate temporary strings to hold dbus paths on the heap (#1667871)
  - sd-bus: if we receive an invalid dbus message, ignore and proceeed (#1667871)
  - udev: check if the spawned PID didn't exit after reaping unexpected PID (#1697909)
  - udev: call poll() again after killing the spawned process (#1697909)
  - udev: check age against both timeouts to prevent integer wraparound (#1697909)
  - avoid possible hang if our child process hangs (#1697909)
  - missing: when adding syscall replacements, use different names (#1694605)
  - include sys/sysmacros.h in more places (#1694605)


author: Lukas Nykryn <lnykryn@redhat.com> - 219-66
changelog:
  - sd-bus: unify three code-paths which free struct bus_container (#1643394)
  - hashmap: don't use mempool (#1609349)
  - man: be more explicit about thread safety of sd_journal (#1609349)
  - selinux: don't log SELINUX_INFO and SELINUX_WARNING messages to audit (#1240730)


author: Lukas Nykryn <lnykryn@redhat.com> - 219-67.1
changelog:
  - return error value on failure (#1729226)
  - revert local changes made during backport of the test (#1729226)
  - core/timer: Prevent timer looping when unit cannot start (#1729230)
  - core: add a "Requires=" dependency between units and the slices they are located in (#1729228)
  - core: rerun GC logic for a unit that loses a reference (#1729228)
  - pid1: rename unit_check_gc to unit_may_gc (#1729228)
  - pid1: include the source unit in UnitRef (#1729228)
  - pid1: fix collection of cycles of units which reference one another (#1729228)
  - pid1: free basic unit information at the very end, before freeing the unit (#1729228)
  - pid1: properly remove references to the unit from gc queue during final cleanup (#1729228)
  - service: relax PID file symlink chain checks a bit (#8133) (#1729414)
  - path-util: fix more path_is_mount e792e890f fallout (#1279231)


author: Mike FABIAN <mfabian@redhat.com> - 50.2-1
changelog:
  - Update to 50.2 maintenance release including support for new Japanese era Reiwa (令和).
  - Resolves: rhbz#1677092


author: Mike FABIAN <mfabian@redhat.com> - 50.2-2
changelog:
  - Fix rpmdiff failure: File /usr/src/debug/icu/source/i18n/unicode/selfmt.h
    relaxed permissions from 0644 to 0755 on all architectures
  - Related: rhbz#1677092


author: Mike FABIAN <mfabian@redhat.com> - 50.2-4
changelog:
  - Apply ICU-13634-Adding-integer-overflow-logic-to-ICU4C-num.patch
  - Apply ICU-20958-Prevent-SEGV_MAPERR-in-append.patch
  - Resolves: rhbz#1808235


author: Miroslav Rezanina <mrezanin@redhat.com> - 1.9.0-3
changelog:
  - Fixed issues reported by coverity (bz #1026820)
  - Do not mark /etc/ld.so.conf.d/ as config (bz #1011126)
  - Resolves: #1026820 
  - Resolves: #1011126


author: Miroslav Rezanina <mrezanin@redhat.com> - 1.9.0-7.el7
changelog:
  - libiscsi-Discovery-return-multiple-portals-for-the-same-disco.patch [bz#1266523]
  - libiscsi-iscsi-ls-skip-link-local-IPv6-addresses.patch [bz#1266523]
  - Resolves: bz#1266523
    (iscsi-ls doesn't work if target has more than one portal)


author: Nikola Forró <nforro@redhat.com> - 1.2.90-7
changelog:
  - Fix CVE-2018-11212 (#1586062)
  - Fix CVE-2016-3616 (#1318509), CVE-2018-11213 (#1589091)
    and CVE-2018-11214 (#1589110)
  - Fix CVE-2018-11813 (#1591203)


author: Steve Dickson <steved@redhat.com> 0.25-13
changelog:
  - Strip newlines out of IDMAP_LOG messages (bz 1261124)
  - Fixed some NEGATIVE_RETURNS that a Covscan scan found (bz 1271449)


author: Steve Dickson <steved@redhat.com> 0.25-15
changelog:
  - nss_getpwnam: correctly check for negative values (bz 1271449)
  - Fixed a memory leak in nss_name_to_gid() (bz 1271449)


author: Steve Dickson <steved@redhat.com> 0.25-16
changelog:
  - Add options to aid id mapping in multi domain environments (bz 1378557)
  - Query DNS for the the NFSv4 domain (bz 980925)


author: Steve Dickson <steved@redhat.com> 0.25-18
changelog:
  - Enlarge the TXT record to lager than 127 characters (bz 1498210)
  - Allow white spaces in static IP mapping (bz 1455923)


author: Michal Sekletar <msekleta@redhat.com> - 14:1.5.3-4
changelog:
  - disable TPACKET_V3 memory mapped packet capture on AF_PACKET socket, use TPACKET_V2 instead (#1085096)


author: Michal Sekletar <msekleta@redhat.com> - 14:1.5.3-5
changelog:
  - display also first packet when capturing in cooked mode (#1176612)
  - make sure that userland bpf filter interpreter is given snaplen such that size of
    cooked header is account for


author: Michal Sekletar <msekleta@redhat.com> - 14:1.5.3-6
changelog:
  - libpcap now correctly recognizes Netlink datalink type (#1031974)
  - fix vlan tagged packet filtering (#1079525)


author: Paul Moore <pmoore@redhat.com> - 2.2.1-1
changelog:
  - Removed '--disable-static' from the build to ensure that scmp_sys_resolver
    is self contained and resolve RPATH issues


author: Petr Lautrbach <plautrba@redhat.com> - 2.5-10
changelog:
  - Add missing av_permission values (#1025931)
  - Set an appropriate errno in booleans.c (#1402140)
  - Change matchpathcon usage to match with matchpathcon manpage (#1412797)


author: Petr Lautrbach <plautrba@redhat.com> - 2.5-8
changelog:
  - Save linked policy, skip re-link when possible
  - Replace access(,F_OK) checks to make setuid programs work (#1186431)


author: Vit Mojzis <vmojzis@redhat.com> - 2.5-9
changelog:
  - Update semanage to allow runtime labeling of Infiniband Pkeys (#1466274)
  - Update semanage to allow runtime labeling of ibendports (#1466274)
  - Keep copy of file_contexts.homedirs in policy store (#1409813)
  - Add support for listing fcontext.homedirs file (#1409813)


author: Vit Mojzis <vmojzis@redhat.com> - 2.5-12
changelog:
  - Do not change file mode of seusers and users_extra (#1512639)
  - Improve warning for installing disabled module (#1337199)


author: Vit Mojzis <vmojzis@redhat.com> - 2.5-14
changelog:
  - Include user name in ROLE_REMOVE audit events (#1622045)
  - Improve "reset umask before creating directories"


author: Steve Dickson <steved@redhat.com> 0.2.4-0.7
changelog:
  - Backported upstream debugging (bz 1273159)
  - Fixed memory leak in svc_vc_create (bz 1276685)
  - Fixed memory leaks in server-side GSS authenticator (bz 1282488)


author: Steve Dickson <steved@redhat.com> 0.2.4-0.16
changelog:
  - getnetconfig.c: fix a BAD_FREE (CWE-763) (bz 1631609)
  - Fix EOF detection on non-blocking socket (bz 1331554)


author: Pavel Raiskup <praiskup@redhat.com> - 2.4.2-14
changelog:
  - allow root to copy files into NFS in libtoolize (#740079)
  - pre-filter sed's input by dd (#636045)


author: Daniel Veillard <veillard@redhat.com> - 2.9.1-1
changelog:
  - upstream release of 2.9.1
  - a couple more API entry point
  - compatibility with python3
  - a lot of bug fixes


author: Daniel Veillard <veillard@redhat.com> - 2.9.1-6
changelog:
  - Fix missing entities after CVE-2014-3660 fix
  - CVE-2014-0191 Do not fetch external parameter entities (rhbz#1195650)
  - Fix regressions introduced by CVE-2014-0191 patch


author: Daniel Veillard <veillard@redhat.com> - 2.9.1-6.2
changelog:
  - Fix a series of CVEs (rhbz#1286496)
  - CVE-2015-7941 Stop parsing on entities boundaries errors
  - CVE-2015-7941 Cleanup conditional section error handling
  - CVE-2015-8317 Fail parsing early on if encoding conversion failed
  - CVE-2015-7942 Another variation of overflow in Conditional sections
  - CVE-2015-7942 Fix an error in previous Conditional section patch
  - Fix parsing short unclosed comment uninitialized access
  - CVE-2015-7498 Avoid processing entities after encoding conversion failures
  - CVE-2015-7497 Avoid an heap buffer overflow in xmlDictComputeFastQKey
  - CVE-2015-5312 Another entity expansion issue
  - CVE-2015-7499 Add xmlHaltParser() to stop the parser
  - CVE-2015-7499 Detect incoherency on GROW
  - CVE-2015-7500 Fix memory access error due to incorrect entities boundaries
  - CVE-2015-8242 Buffer overead with HTML parser in push mode
  - CVE-2015-1819 Enforce the reader to run in constant memory


author: Daniel Veillard <veillard@redhat.com> - libxml2-2.9.1-6.3
changelog:
  - Heap-based buffer overread in xmlNextChar (CVE-2016-1762)
  - Bug 763071: Heap-buffer-overflow in xmlStrncat <https://bugzilla.gnome.org/show_bug.cgi?id=763071> (CVE-2016-1834)
  - Bug 757711: Heap-buffer-overflow in xmlFAParsePosCharGroup <https://bugzilla.gnome.org/show_bug.cgi?id=757711> (CVE-2016-1840)
  - Bug 758588: Heap-based buffer overread in xmlParserPrintFileContextInternal <https://bugzilla.gnome.org/show_bug.cgi?id=758588> (CVE-2016-1838)
  - Bug 758605: Heap-based buffer overread in xmlDictAddString <https://bugzilla.gnome.org/show_bug.cgi?id=758605> (CVE-2016-1839)
  - Bug 759398: Heap use-after-free in xmlDictComputeFastKey <https://bugzilla.gnome.org/show_bug.cgi?id=759398> (CVE-2016-1836)
  - Fix inappropriate fetch of entities content (CVE-2016-4449)
  - Heap use-after-free in htmlParsePubidLiteral and htmlParseSystemiteral (CVE-2016-1837)
  - Heap use-after-free in xmlSAX2AttributeNs (CVE-2016-1835)
  - Heap-based buffer-underreads due to xmlParseName (CVE-2016-4447)
  - Heap-based buffer overread in htmlCurrentChar (CVE-2016-1833)
  - Add missing increments of recursion depth counter to XML parser. (CVE-2016-3705)
  - Avoid building recursive entities (CVE-2016-3627)
  - Fix some format string warnings with possible format string vulnerability (CVE-2016-4448)
  - More format string warnings with possible format string vulnerability (CVE-2016-4448)


author: David King <dking@redhat.com> - 2.9.1-6.4
changelog:
  - Fix CVE-2015-8035 (#1595697)
  - Fix CVE-2018-14404 (#1602817)
  - Fix CVE-2017-15412 (#1729857)
  - Fix CVE-2016-5131 (#1714050)
  - Fix CVE-2017-18258 (#1579211)
  - Fix CVE-2018-1456 (#1622715)


author: Bruno E. O. Meneguele <bmeneg@redhat.com> - 20180518-63.git2a9b2cf
changelog:
  - Update to latest upstream linux-firmware image for assorted netdrv updates
  - amd: add microcode for family 17h and update for family 15h (rhbz 1574575)


author: Bruno E. O. Meneguele <bmeneg@redhat.com> - 20180529-65.git7518922
changelog:
  - Update to latest upstream linux-firmware image for assorted updates
  - amd: update microcode for family 15h (rhbz 1574575)


author: Bruno E. O. Meneguele <bmeneg@redhat.com> - 20180717-67.git8d69bab
changelog:
  - Update to latest upstream linux-firmware image for assorted netdrv updates
  - chelsio: update firmware to revision 1.20.8.0 (rhbz 1523202)


author: Bruno E. O. Meneguele <bmeneg@redhat.com> - 20180911-68.git85c5d90
changelog:
  - Update to latest upstream linux-firmware image for assorted updates
  - nvidia: update firmware for Pascal GPUs (rhbz 1625514)


author: Bruno E. O. Meneguele <bmeneg@redhat.com> - 20190225-70.git80dee31
changelog:
  - cxgb4: update firmware to revision 1.22.9.0 (rhbz 1671610)
  - nfp: update Agilio SmartNIC flower firmware to rev AOTC-2.10.A.13 (rhbz 1637996)
  - linux-firmware: Update firmware patch for Intel Bluetooth 8260 (rhbz 1649148)
  - qed: Add 8.37.7.0 firmware image (rhbz 1654809)
  - liquidio: fix GPL compliance issue (rhbz 1622521)
  - Update Intel OPA hfi1 firmware (rhbz 1637240)
  - qed: Add firmware 8.37.7.0 (rhbz 1643554)


author: Bruno E. O. Meneguele <bmeneg@redhat.com> - 20190318-71.git283373f
changelog:
  - Update to latest upstream linux-firmware image for assorted updates
  - cxgb4: update firmware to revision 1.23.3.0 (rhbz 1642422)


author: Bruno E. O. Meneguele <bmeneg@redhat.com> - 20190429-72.gitddde598
changelog:
  - Update to latest upstream linux-firmware image for assorted updates
  - cxgb4: update firmware to revision 1.23.4.0 (rhbz 1690727)
  - linux-firmware: Add firmware file for Intel Bluetooth 22161 (rhbz 1622438)


author: Martin Sehnoutka <msehnout@redhat.com> - 3.4.0-0.20160601gitf9185e5.1
changelog:
  - New upstream release
  - Drop patches that are already present in upstream
  - Apply upstream fix for systemd paths
  - Resolves: #1297795


author: Ondřej Lysoněk <olysonek@redhat.com> - 3.4.0-6.20160601gitf9185e5
changelog:
  - Fix License field capitalization
  - Resolves: rhbz#1577175
  - Add detection of AMD Ryzen w/ Vega graphics
  - Resolves: rhbz#1569542
  - Fix issues found by Coverity Scan
  - Resolves: rhbz#1578007


author: Nikola Forró <nforro@redhat.com> - 12.5-13
changelog:
  - fix SIGSEGV crash in smtp_auth_var()
  - add warning message for empty from variable
    resolves: #1113611


author: Michal Schorm <mschorm@redhat.com> - 5.5.52-2
changelog:
  - Extension of mariadb-prepare-db-dir script
  - Resolves: #1356897

  - Rebase to 5.5.52, that also include fix for CVE-2016-6662
    Resolves: #1377974


author: Honza Horak <hhorak@redhat.com> - 1:5.5.56-1
changelog:
  - Rebase to 5.5.56
    That release also fixes the following security issues:
    CVE-2016-5617/CVE-2016-6664 CVE-2017-3312 CVE-2017-3238 CVE-2017-3243
    CVE-2017-3244 CVE-2017-3258 CVE-2017-3313 CVE-2017-3317 CVE-2017-3318
    CVE-2017-3291 CVE-2017-3302 CVE-2016-5483/CVE-2017-3600 CVE-2017-3308
    CVE-2017-3309 CVE-2017-3453 CVE-2017-3456 CVE-2017-3464
    Resolves: #1458933
    New deps required by upstream: checkpolicy and policycoreutils-python
    License text removed by upstream: COPYING.LESSER
    Do not ignore test-suite failure
    Downstream script mariadb-prepare-db-dir fixed for CVE-2017-3265
    Resolves: #1458940


author: Honza Horak <hhorak@redhat.com> - 1:5.5.56-2
changelog:
  - Do not fix context and change owner if run by root in mariadb-prepare-db-dir
    Related: #1458940
  - Check properly that datadir includes only expected files
    Related: #1356897


author: Michal Schorm <mschorm@redhat.com> - 1:5.5.60-1
changelog:
  - Rebase to 5.5.60
  - CVE's fixed: #1558256, #1558260, #1559060
    CVE-2017-3636 CVE-2017-3641 CVE-2017-3653 CVE-2017-10379
    CVE-2017-10384 CVE-2017-10378 CVE-2017-10268 CVE-2018-2562
    CVE-2018-2622 CVE-2018-2640 CVE-2018-2665 CVE-2018-2668
    CVE-2018-2755 CVE-2018-2819 CVE-2018-2817 CVE-2018-2761
    CVE-2018-2781 CVE-2018-2771 CVE-2018-2813
  - Resolves: #1535217, #1491833, #1511982, #1145455, #1461692


author: Michal Schorm <mschorm@redhat.com> - 1:5.5.64-1
changelog:
  - Rebase to 5.5.64
  - Resolves: #1490398
  - CVE's fixed: #1610986
    CVE-2018-3058 CVE-2018-3063 CVE-2018-3066 CVE-2018-3081
  - CVE's fixed: #1664043
    CVE-2018-3282 CVE-2019-2503
  - CVE's fixed: #1701686
    CVE-2019-2529


author: Honza Horak <hhorak@redhat.com> - 1:5.5.65-1
changelog:
  - Rebase to 5.5.65
    Also fixes:
    CVE-2019-2737 CVE-2019-2739 CVE-2019-2740 CVE-2019-2805
    Resolves: #1741357
  - Revert upstream changes that make the mysql_install_db relocatable
    because it broke mysql_install_db when run without --rpm arg
    Resolves: #1731062
  - Add openssl BR that was missing for the tests


author: Michal Schorm <mschorm@redhat.com> - 1:5.5.66-1
changelog:
  - Rebase to 5.5.66
  - Related to: rhbz#1834835
  - CVE's fixed: rhbz#1769276 rhbz#1830110
    CVE-2019-2974 CVE-2020-2780


author: Michal Schorm <mschorm@redhat.com> - 1:5.5.68-1
changelog:
  - Rebase to 5.5.68
    This is the last upstream release. This major version reached upstream EOL
  - Related to: rhbz#1834835


author: Josef Ridky <jridky@redhat.com> - 1:5.7.2-39
changelog:
  - adjust logging of statfs (#1314610)
  - link libnetsnmptrapd against MYSQL LIBS (#1468084)
  - expand SNMPCONFPATH (#1514501)
  - remove date in mailheader (#1585940)


author: Michal Ruprich <mruprich@redhat.com> - 2.0-0.18.20131004git
changelog:
  - Resolves: #1063913 - netstat doesn't list sctp servers in -A mode
  - Resolves: #1257549 - netstat tool does not throw correct exit code on wrong parameter
  - Resolves: #1392910 - ifconfig inaccurately rounds exabytes


author: Michal Ruprich <mruprich@redhat.com> - 2.0-0.25.20131004git
changelog:
  - Resolves: #1632905 - The output of `route -A inet6` does not display properly when the 'Use' column output is over 6 digits


author: Nikos Mavrogiannopoulos <nmav@redhat.com> - 2.7.1-5
changelog:
  - Fixed SHA-3 implementation to conform to final standard (#1252936)
  - Fixed CVE-2015-8803 CVE-2015-8804 CVE-2015-8805 which caused issues
    in secp256r1 and secp384r1 calculations (#1314374)


author: Nikos Mavrogiannopoulos <nmav@redhat.com> - 2.7.1-8
changelog:
  - Use a cache-silent version of mpz_powm to prevent cache-timing
    attacks against RSA and DSA in shared VMs. (#1364897,CVE-2016-6489)


author: Steve Dickson <steved@redhat.com> 1.3.0-0.57
changelog:
  - rpc.gssd: truncates 32-bit UIDs/GIDs to 16 bits architectures (bz 1602836)
  - Added back lockd vars to nfs-utils_env.sh and sysconfig (bz 1413272)
  - Document nfs v4 mounts will use Kerberos we available (bz 1334510)


author: Steve Dickson <steved@redhat.com> 1.3.0-0.63
changelog:
  - nfs.conf: Fixed manage-gids option typo (bz 1677403)
  - sm-notify: Added -f flag to nfs.conf parsing (bz 1688932)
  - Add nfs.conf equivalent for the statd --no-notify cmdline option (bz 1688918)
  - nfs-server: Use reload not restart to start gssproxy (bz 1644169)


author: Miroslav Lichvar <mlichvar@redhat.com> 4.2.6p5-19
changelog:
  - don't generate weak control key for resolver (CVE-2014-9293)
  - don't generate weak MD5 keys in ntp-keygen (CVE-2014-9294)
  - fix buffer overflows via specially-crafted packets (CVE-2014-9295)
  - don't mobilize passive association when authentication fails (CVE-2014-9296)


author: Miroslav Lichvar <mlichvar@redhat.com> 4.2.6p5-20
changelog:
  - validate lengths of values in extension fields (CVE-2014-9297)
  - drop packets with spoofed source address ::1 (CVE-2014-9298)
  - reject packets without MAC when authentication is enabled (CVE-2015-1798)
  - protect symmetric associations with symmetric key against DoS attack (CVE-2015-1799)
  - fix generation of MD5 keys with ntp-keygen on big-endian systems (CVE-2015-3405)
  - add option to set Differentiated Services Code Point (DSCP) (#1202828)
  - add nanosecond support to SHM refclock (#1117702)
  - allow creating all SHM segments with owner-only access (#1122012)
  - allow different thresholds for forward and backward step (#1193154)
  - allow symmetric keys up to 32 bytes again (#1191111)
  - don't step clock for leap second with -x option (#1191122)
  - don't drop packets with source port below 123 (#1171640)
  - retry joining multicast groups (#1207014)
  - increase memlock limit again (#1053569)
  - warn when monitor can't be disabled due to limited restrict (#1191108)
  - use larger RSA exponent in ntp-keygen (#1191116)
  - fix crash in ntpq mreadvar command (#1180721)
  - move sntp kod database to allow SELinux labeling (#1082934)
  - fix typos in ntpd man page (#1195211)
  - improve documentation of restrict command (#1213953)


author: Miroslav Lichvar <mlichvar@redhat.com> 4.2.6p5-22
changelog:
  - check origin timestamp before accepting KoD RATE packet (CVE-2015-7704)
  - allow only one step larger than panic threshold with -g (CVE-2015-5300)


author: Miroslav Lichvar <mlichvar@redhat.com> 4.2.6p5-24
changelog:
  - fix crash with invalid logconfig command (CVE-2015-5194)
  - fix crash when referencing disabled statistic type (CVE-2015-5195)
  - don't hang in sntp with crafted reply (CVE-2015-5219)
  - don't crash with crafted autokey packet (CVE-2015-7691, CVE-2015-7692,
    CVE-2015-7702)
  - fix memory leak with autokey (CVE-2015-7701)
  - don't allow setting driftfile and pidfile remotely (CVE-2015-7703)
  - don't crash in ntpq with crafted packet (CVE-2015-7852)
  - check key ID in packets authenticated with symmetric key (CVE-2015-7974)
  - fix crash with reslist command (CVE-2015-7977, CVE-2015-7978)
  - don't allow spoofed packets to demobilize associations (CVE-2015-7979,
    CVE-2016-1547)
  - don't accept server/peer packets with zero origin timestamp (CVE-2015-8138)
  - fix infinite loop in ntpq/ntpdc (CVE-2015-8158)
  - fix resetting of leap status (#1242553)
  - extend rawstats log (#1242877)
  - report clock state changes related to leap seconds (#1242935)
  - allow -4/-6 on restrict lines with mask (#1304492)
  - explain synchronised state in ntpstat man page (#1309594)


author: Miroslav Lichvar <mlichvar@redhat.com> 4.2.6p5-25
changelog:
  - don't allow spoofed packet to enable symmetric interleaved mode
    (CVE-2016-1548)
  - check mode of new source in config command (CVE-2016-2518)
  - make MAC check resilient against timing attack (CVE-2016-1550)


author: Miroslav Lichvar <mlichvar@redhat.com> 4.2.6p5-26
changelog:
  - don't limit rate of packets from sources (CVE-2016-7426)
  - don't change interface from received packets (CVE-2016-7429)
  - fix calculation of root distance again (CVE-2016-7433)
  - require authentication for trap commands (CVE-2016-9310)
  - fix crash when reporting peer event to trappers (CVE-2016-9311)


author: Miroslav Lichvar <mlichvar@redhat.com> 4.2.6p5-28
changelog:
  - fix buffer overflow in datum refclock driver (CVE-2017-6462)
  - fix crash with invalid unpeer command (CVE-2017-6463)
  - fix potential crash with invalid server command (CVE-2017-6464)
  - add Spectracom TSYNC driver (#1491797)
  - fix initialization of system clock status (#1493452)
  - fix typos in ntpd man page (#1420453)
  - use SHA1 request key by default (#1442083)
  - use network-online target in ntpdate and sntp services (#1466947)


author: Miroslav Lichvar <mlichvar@redhat.com> 4.2.6p5-29
changelog:
  - fix CVE-2016-7429 patch to restore default ttl configuration (#1550637)
  - fix buffer overflow in parsing of address in ntpq and ntpdc (CVE-2018-12327)
  - fix crash in parsing of received address in ntpq (#1616250)
  - avoid reading freed memory after disabling netlink socket (#1555401)
  - don't disable netlink socket on ENOBUFS error (#1555413)
  - replace ntpstat with shell script using ntpq and supporting chrony (#1592871)


author: Golo Fuchert <packages@golotop.de> 20131222-1
changelog:
  - Updated to newest versoin 20131222
  - Removed patches that are no longer needed (see below for details)
  - Remvoal of parallel-config, feature deprecated


author: Than Ngo <than@redhat.com> - 2.7.1-11
changelog:
  - Fixed CVE-2016-10713 - Out-of-bounds access in pch_write_line function 
  - Fixed CVE-2018-6952 - Double free of memory
  - Resolves: #1626473, honor new file mode 100755 when applying patches
  - Resolves: #1653294, Added virtual provides for bundled gnulib library


author: Petr Pisar <ppisar@redhat.com> - 10.22-7
changelog:
  - Fix pcre2-config --libs-posix output (upstream bug #1924)
  - Fix a memory leak and a typo in a documentation (upstream bug #1973)
  - Fix a buffer overflow in partial match test for CRLF in an empty buffer
    (upstream bug #1975)
  - Fix a crash in pcre2test when displaying a wide character with a set locate
    (upstream bug #1976)


author: Petr Pisar <ppisar@redhat.com> - 10.22-8
changelog:
  - Fix a crash when doing an extended substitution for \p, \P, or \X
    (upstream bug #1977)
  - Fix a crash in substitution if starting offest was specified beyond the
    subject end (upstream bug #1992)


author: Petr Pisar <ppisar@redhat.com> - 10.23-2
changelog:
  - Handle memmory allocation failures in pcre2test tool
  - Fix a crash when finding a Unicode property for a character with a code
    point greater than 0x10ffff in UTF-32 library while UTF mode is disabled
    (upstream bug #2052)


author: Petr Pisar <ppisar@redhat.com> - 4:5.16.3-286
changelog:
  - Remove CPU-speed-sensitive test in Benchmark test (bug #1238567)
  - Rebuild with corrected binutils to fix systemtap support (bug #1238472)


author: Jitka Plesnikova <jplesnik@redhat.com> - 4:5.16.3-288
changelog:
  - Fix CRLF conversion in ASCII FTP upload (bug #1263734)
  - Don't leak the temp utf8 copy of namepv (bug #1063330)


author: Jitka Plesnikova <jplesnik@redhat.com> - 4:5.16.3-291
changelog:
  - Backported and sub-packaged libraries historically supplied with Perl 4
    into perl-Perl4-CoreLibs


author: Petr Pisar <ppisar@redhat.com> - 4:5.16.3-293
changelog:
  - Add SSL support to Net::SMTP (bug #1557574)
  - Do not overload ".." in Math::BigInt (bug #1497734)
  - Provide perl(:VERSION) and perl-interpreter RPM symbols (bug #1410347)


author: Paul Howarth <paul@city-fan.org> - 2.055-1
changelog:
  - Update to 2.055
    - Fix misuse of magic in API (CPAN RT#78080)
  - Drop redundant explicit requires for perl(Exporter) and perl(File::Temp)


author: Paul Howarth <paul@city-fan.org> - 2.058-1
changelog:
  - Update to 2.058
    - Compress::Raw::Bzip2 needs to use PERL_NO_GET_CONTEXT (CPAN RT#80318)
    - Install to 'site' instead of 'perl' when perl version is 5.11+
      (CPAN RT#79811)
    - Update to ppport.h that includes SvPV_nomg_nolen (CPAN RT#78080)


author: Paul Howarth <paul@city-fan.org> - 2.058-1
changelog:
  - Update to 2.058
    - Compress::Raw::Zlib needs to use PERL_NO_GET_CONTEXT (CPAN RT#80319)
    - Install to 'site' instead of 'perl' when perl version is 5.11+
      (CPAN RT#79812)
    - Update to ppport.h that includes SvPV_nomg_nolen (CPAN RT#78079)


author: Paul Howarth <paul@city-fan.org> - 2.061-1
changelog:
  - Update to 2.061
    - Include zlib 1.2.8 source
    - Typo fix (CPAN RT#85431)
    - Silence compiler warning by making 2nd parameter to DispStream a const char*


author: Marcela Mašláňová <mmaslano@redhat.com> - 2.135.07-240
changelog:
  - update the version to override the module from perl.srpm
  - bump release to override sub-package from perl.spec


author: Petr Pisar <ppisar@redhat.com> - 2.51-6
changelog:
  - Rebuild against "file" package fixed by Jan Kaluza to correct run-time
    dependencies (bug #1048910)


author: Petr Pisar <ppisar@redhat.com> - 0.033-2
changelog:
  - Croak on failed write into a file (bug #1031096)
  - Do not use already existing temporary files (bug #1031096)


author: Paul Howarth <paul@city-fan.org> - 2.055-1
changelog:
  - Update to 2.055
    - FAQ: added a few paragraphs on how to deal with pbzip2 files
      (CPAN RT#77743)
    - Compress::Zip: speed up compress, uncompress, memGzip and memGunzip
      (CPAN RT#77350)
  - BR: perl(lib)
  - Drop BR: perl(Test::Builder) and perl(Test::More) as they're bundled
  - Drop BR: perl(Config), perl(Fcntl), perl(File::Copy), perl(File::Glob),
    perl(POSIX) and perl(Symbol) as they're not dual-lived
  - Drop redundant explicit require for perl(Exporter)
  - Don't use macros for commands


author: Paul Howarth <paul@city-fan.org> - 2.058-1
changelog:
  - Update to 2.058
    - IO::Compress::Zip
      - Allow member name and Zip Comment to be "0"
    - IO::Compress::Base::Common
      - Remove "-r" test - the file open will catch this
      - IO::Compress::Base::Common returned that it could not read readable files
        in NFS (CPAN RT#80855)
    - Install to 'site' instead of 'perl' when perl version is 5.11+
      (CPAN RT#79820)
    - General performance improvements
    - Fix failing 01misc.t subtest introduced in 2.057 (CPAN RT#81119)
  - Explicitly install to 'perl' directories


author: Paul Howarth <paul@city-fan.org> - 2.059-1
changelog:
  - Update to 2.059
    - IO::Compress::Base
      - Added "Encode" option (fixes the encoding half of CPAN RT#42656)


author: Paul Howarth <paul@city-fan.org> - 2.060-1
changelog:
  - Update to 2.060
    - Updated POD
      - CPAN RT#82138: Example code not clear - gunzip() takes filenames!
    - IO::Compress::Base
      - Remove the flush call when opening a filehandle


author: Paul Howarth <paul@city-fan.org> - 2.061-1
changelog:
  - Update to 2.061
    - zipdetails (1.06)
      - Get it to cope with Android 'zipalign' non-standard extra fields; these
        are used to make sure that a non-compressed member starts on a 4 byte
        boundary
    - unzip example with IO::Uncompress::Unzip (CPAN RT#84647)


author: Marcela Mašláňová <mmaslano@redhat.com> - 1:0.225-4
changelog:
  - Install to vendor directories rather than perl core directories so as to
    avoid conflicts between our debuginfo and the main perl-debuginfo package


author: Paul Howarth <paul@city-fan.org> - 1:0.225-6
changelog:
  - Reinstate compatibility with old distributions like EL-5
    - Add back buildroot definition and cleaning
  - Use DESTDIR rather than PERL_INSTALL_ROOT
  - Make %files list more explicit
  - Drop redundant %{?perl_default_filter}
  - Don't use macros for commands
  - Use tabs


author: Paul Howarth <paul@city-fan.org> - 1:0.225-242
changelog:
  - Don't need to remove empty directories from the buildroot
  - Drop %defattr, redundant since rpm 4.4


author: Jitka Plesnikova <jplesnik@redhat.com> - 1.42-2
changelog:
  - Add BR perl(File::Spec)
  - Replace PERL_INSTALL_ROOT with DESTDIR
  - Remove deleting empty directories
  - Remove defattr


author: Vit Mojzis <vmojzis@redhat.com> - 2.5-30
changelog:
  - semanage/seobject: Fix listing boolean values (#1391605)
  - sepolicy: Make policy files sorting more robust
  - semanage: Fix setting alternative policy store (#1558033)
  - semanage: Load a store policy and set the store SELinux policy root
  - sepolicy: Add sepolicy.load_store_policy(store)
  - semanage: import sepolicy only when it's needed
  - semanage: move valid_types initialisations to class constructors
  - semanage/seobject: Fix indentation issues
  - scripts/fixfiles: Do not fail on file_contexts.local (#1647714)


author: Vit Mojzis <vmojzis@redhat.com> - 2.5-31
changelog:
  - semanage: Start exporting "ibendport" and "ibpkey" entries (#1657196)
  - semanage: Do not show "None" levels when using a non-MLS policy (#1400482)
  - semanage: Include MCS/MLS range when exporting local customizations (#1400482)


author: Jan Rybar <jrybar@redhat.com> 22.20-13
changelog:
  - fuser manpage: note about invisible other PIDs moved to RESTRICTIONS section
  - Resolves: rhbz#1400126


author: Matt Domsch <mdomsch@fedoraproject.org> - 0.70-1
changelog:
  - Version 0.70 (2009-10-29)
    * New "major" version because it may break compatibility
    * Fix __cmp__(): IP('0.0.0.0/0') and IP('0.0.0.0') are not equal
    * Fix IP.net() of the network "::/0": "::" instead of "0.0.0.0".
      IPy 0.63 should fix this bug, but it wasn't.


author: Matt Domsch <mdomsch@fedoraproject.org> - 0.75-1
changelog:
  - Version 0.75 (2011-04-12)
   * IP('::/0').netmask() gives IP('::') instead of IP('0.0.0.0') (BZ#690625)
   * Fix tests for Python 3.1 and 3.2
   * ip.__nonzero__() and (ipa in ipb) return a bool instead of 0 or 1
   * IP('0.0.0.0/0') + IP('0.0.0.0/0') raises an error, fix written by Arfrever
   * Support Python 3: setup.py runs 2to3
   * Update the ranges for IPv6 IPs
   * Fix reverseName() and reverseNames() for IPv4 in IPv6 addresses
   * Drop support of Python < 2.5
   * Include examples and MANIFEST.in in source build (add them to MANIFEST.in)
   * Remove __rcsid__ constant from IPy module
   * Use xrange() instead of range()
   * Use isinstance(x, int) instead of type(x) == types.IntType
   * Prepare support of Python3 (use integer division: x // y)
   * Fix IP(long) constructor: ensure that the address is not too large
   * Constructor raise a TypeError if the type is not int, long, str or unicode
   * 223.0.0.0/8 is now public (belongs to APNIC)


author: Nils Philippsen <nils@redhat.com> - 0.9.6-1
changelog:
  - version 0.9.6:
    * Backport r493-494: documentation typo fixes.
    * Make the CLDR import script work with Python 2.7.
    * Fix various typos.
    * Fixed Python 2.3 compatibility (ticket #146, #233).
    * Sort output of list-locales.
    * Make the POT-Creation-Date of the catalog being updated equal to
      POT-Creation-Date of the template used to update (ticket #148).
    * Use a more explicit error message if no option or argument (command) is
      passed to pybabel (ticket #81).
    * Keep the PO-Revision-Date if it is not the default value (ticket #148).
    * Make --no-wrap work by reworking --width's default and mimic xgettext's
      behaviour of always wrapping comments (ticket #145).
    * Fixed negative offset handling of Catalog._set_mime_headers (ticket #165).
    * Add --project and --version options for commandline (ticket #173).
    * Add a __ne__() method to the Local class.
    * Explicitly sort instead of using sorted() and don't assume ordering
      (Python 2.3 and Jython compatibility).
    * Removed ValueError raising for string formatting message checkers if the
      string does not contain any string formattings (ticket #150).
    * Fix Serbian plural forms (ticket #213).
    * Small speed improvement in format_date() (ticket #216).
    * Fix number formatting for locales where CLDR specifies alt or draft
      items (ticket #217)
    * Fix bad check in format_time (ticket #257, reported with patch and tests by
      jomae)
    * Fix so frontend.CommandLineInterface.run does not accumulate logging
      handlers (#227, reported with initial patch by dfraser)
    * Fix exception if environment contains an invalid locale setting (#200)
  - install python2 rather than python3 executable (#710880)


author: Kevin Fenzi <kevin@scrye.com> 0.9-6
changelog:
  - Add patch to fix http over proxy. Fixes bug #857514
  - Add patch to fix CVE-2013-2037. Fixes bug #958640
  - Add patch to fix binary headers in python3. Fixes bug #1205127


author: Bohuslav Kabrda <bkabrda@redhat.com> - 2.7.2-1
changelog:
  - Reverted flawed patch for #1051427 (this reintroduces #1052102).
  - Spec cleanup (removed rhel < 7 specific stuff).
  - Update to 2.7.2.
  Resolves: rhbz#1052777


author: Miro Hrončok <mhroncok@redhat.com> - 2.7.2-3
changelog:
  - Replace lambda for 'dict' with dict itself to support all dict constructors
  Resolves: rhbz#1697237


author: Toshio Kuratomi <toshio@fedoraproject.org> - 0.2.4-1
changelog:
  - Upstream update 0.2.4
    - Changes i18n.easy_gettext_setup() to return lgettext functions when
      byte strings are requested.


author: Pavel Cahyna <pcahyna@redhat.com> - 2.1.1-3
changelog:
  - Fix a security flaw (CVE-2018-7750) in Paramiko's server
    mode (emphasis on **server** mode; this does **not** impact *client* use!)
    Backported from 2.1.5.
    Resolves #1557142


author: Pavel Cahyna <pcahyna@redhat.com> - 2.1.1-4
changelog:
  - Add a dependency on python2-pyasn1. It used to be a dependency
    of python2-cryptography, but it is not the case with newer versions.
    (RHBZ #1559133)


author: Jake Hunsaker <jhunsake@redhat.com> - 2.1.1-9
changelog:
  - Fix a security flaw (CVE-2018-1000805) in Paramiko's server
    mode (does not effect client mode).
    Backported from 2.1.6
    Resolves rhbz#1637366


author: Eric Smith <brouhaha@fedoraproject.org> 2.09.1-3
changelog:
  - Run _build_tables.py to build the lextab.py and yacctab.py; otherwise
    they have to be regenerated at runtime for no benefit.


author: Eric Smith <brouhaha@fedoraproject.org> 2.09.1-4
changelog:
  - Upstream repository is now on github.
  - Fix rpmlint strange-permission complaint.
  - Rename patches, Source1 to all start with pycparser-{version}, to
    simplify updating patches for future upstream releases.


author: Eric Smith <brouhaha@fedoraproject.org> 2.09.1-5
changelog:
  - Renumbered Fedora-specific Patch1 to Patch100
  - Added new Patch1 to fix table generation when the build system
    already has a python-pycparser package installed.
  - Submitted Patch0 and Patch1 as upstream issues.
  - Added comments about patches.


author: Tomas Orsava <torsava@redhat.com> - 2.6.0-7
changelog:
  - Modify tests to run in pytest
  - Add a bcond online_tests to enable the tests
  Related: rhbz#1745417


author: Charalampos Stratakis <cstratak@redhat.com> - 2.6.0-9
changelog:
  - Bring back the requests.packages aliasing of its submodules
  Resolves: rhbz#1785607, rhbz#1785666, rhbz#1785696, rhbz#1787679


author: Charalampos Stratakis <cstratak@redhat.com> - 2.6.0-10
changelog:
  - Fix test_urllib3_retries by having it import urllib3 from the global namespace
  Resolves: rhbz#1771567


author: Bohuslav Kabrda <bkabrda@redhat.com> - 0.8-1
changelog:
  - Switch source from distribute to setuptools, that are now uptodate and supported.
  - Update to setuptools 0.8.0.
  - Specfile cleanup (unnecessary Python 3 logic, old RPM stuff, bogus changelog dates)


author: Ralph Bean <rbean@redhat.com> - 1.5-3
changelog:
  - Renamed patches to python-urllib3-*
  - Fixed ssl check patch to use the correct cert path for Fedora.
  - Included dependency on ca-certificates
  - Cosmetic indentation changes to the .spec file.


author: Ralph Bean <rbean@redhat.com> - 1.5-4
changelog:
  - Upstream patch to fix Accept header when behind a proxy.
  - Reorganize patch numbers to more clearly distinguish them.


author: bkabrda <bkabrda@redhat.com> - 1.10.2-2
changelog:
  - Fix the way we unbundle six to make ovirt work even when they remove .py files
  Resolves: rhbz#1247093


author: Christian Heimes <cheimes@redhat.com> - 1.7.2-1
changelog:
  - Update to 1.7.2
  - Disable pytest.deprecated_call() tests
  - Remove versioned pytest
  - Add build requirements pytz


author: Christian Heimes <cheimes@redhat.com> - 1.7.2-2
changelog:
  - Ignore errors on OpenSSL's error stack when initializing, fixes RHBZ#1402235
  - Add depenency on python-setuptools, fixes RHBZ#1459947
  - Fix parsing of long OIDs, fixes RHBZ#1455755


author: Jamie Nguyen <jamielinux@fedoraproject.org> - 0.1.6-1
changelog:
  - update to upstream release 0.1.6
  - update modules to 0.0.4
  - update description
  - add python3-pyasn1 subpackage
  - add versioned Requires for the module subpackages
  - add %check section


author: Charalampos Stratakis <cstratak@redhat.com> - 3.6.8-18
changelog:
  - Avoid infinite loop when reading specially crafted TAR files (CVE-2019-20907)
  Resolves: rhbz#1856481
  - Resolve hash collisions for Pv4Interface and IPv6Interface (CVE-2020-14422)
  Resolves: rhbz#1854926


author: Miro Hrončok <mhroncok@redhat.com> - 9.0.3-2
changelog:
  - Allow to import pip10's main from pip9's /usr/bin/pip
  - Do not show the "new version of pip" warning outside of venv
  Resolves: rhbz#1569488
  Resolves: rhbz#1571650
  Resolves: rhbz#1573755


author: Lumír Balhar <lbalhar@redhat.com> - 9.0.3-3
changelog:
  - Converting pip specfile from F28 to RHEL7
  - Disabled building of the Python 2 subpackage
  - Disabled building of docs, because we don't ship its build dependencies in
    RHEL7
  - Updated to a newer version of tests to match the package version
  - Backported Patch3 and Patch4 from Fedora
  Resolves: rhbz#1660573


author: Lumír Balhar <lbalhar@redhat.com> - 9.0.3-6
changelog:
  - Add four new patches for CVEs in bundled urllib3 and requests
  CVE-2018-20060, CVE-2019-11236, CVE-2019-11324, CVE-2018-18074
  Resolves: rhbz#1649153
  Resolves: rhbz#1700824
  Resolves: rhbz#1702473
  Resolves: rhbz#1643829


author: Lumír Balhar <lbalhar@redhat.com> - 39.2.0-7
changelog:
  - Converting specfile from F28 to RHEL7
  - Tests disabled because the minimal RHEL7 Python 3 stack does not contain test
    dependencies
  - Disabled building of the Python 2 subpackage
  Resolves: rhbz#1660563


author: Lumír Balhar <lbalhar@redhat.com> - 39.2.0-8
changelog:
  - SRPM renamed from python-setuptools to python3-setuptools
  - Package prepared to contain only Python 3 version
  Resolves: rhbz#1660563


author: Iryna Shcherbina <ishcherb@redhat.com> - 0.8.0-2
changelog:
  - Update Python 2 dependency declarations to new packaging standards
    (See https://fedoraproject.org/wiki/FinalizingFedoraSwitchtoPython3)


author: Petr Pisar <ppisar@redhat.com> - 1:4.01-12
changelog:
  - Do not warn if rquotad RPC service is not registered (bug #1155584)
  - Query kernel for next quota on XFS or file system with hidden quota files
    (bug #1305968)
  - Add rpc-rquotad.service file which was known as nfs-rquotad.service
    in nfs-utils (bug #1207239)


author: Petr Pisar <ppisar@redhat.com> - 1:4.01-14
changelog:
  - Add nfs-rquotad.service alias for backward compatibility (bug #1207239)
  - Start rpc-rquotad.service when starting nfs-server.service (bug #1207239)


author: Petr Pisar <ppisar@redhat.com> - 1:4.01-18
changelog:
  - Distinguish between none quota limits and no allocated resources in quota(1)
    tool (bug #1601109)


author: Ondrej Vasik <ovasik@redhat.com> - 4.1-18
changelog:
  - Require sil-abyssinica-fonts in supplemental(#994341)
  - Fully specify requirements on subpackages(#971386)


author: Pavel Šimerda <psimerda@redhat.com> - 3.0.9-14
changelog:
  - Resolves: #1052814 - rsync command is terminated with SIGSEGV
  - Resolves: #1052814 - add missing patch file


author: Luboš Uhliarik <luhliari@redhat.com> - 3.0.9-17
changelog:
  - Resolves: #1082496 - socket activation for rsync doesn't work (added missing
    rsyncd@.service file)


author: Michal Ruprich - 3.1.2-4
changelog:
  - Related: #1432899 - removing dependencies on perl
  - using the bundled zlib.h(#1491582)
  - turning on upstream tests


author: Paul Wouters <pwouters@redhat.com> - 1.7.2.2-2
changelog:
  - Resolves: rhel#1017015 Use readline, not compat-readline5-devel
  - Added two patches fixing -Wformat issues
  - Enable hardened build
  - Cleanup obsolete spec file lines


author: Pavel Raiskup <praiskup@redhat.com> - 1.5.2-1
changelog:
  - rebase to most up2date upstream tarball, remove patches already upstream, fix
    code movements in patches (#928758)
  - fix man-page-day objections (private #948866)
  - fix the build for aarch64 (#926571)


author: Pavel Raiskup <praiskup@redhat.com> - 1.5.2-2
changelog:
  - package spax and scpio separately (#959917)
  - fedora-review fixes, unapplied patch
  - make the spax to be pax alternative (#960007)


author: Pavel Raiskup <praiskup@redhat.com> - 1.5.2-7
changelog:
  - we should provide /etc/rmt symlink for a while (related to #968980)
  - use the ssh as the default remote access method


author: Manuel "lonely wolf" Wolfshant <wolfy@fedoraproject.org> - 2.64-5
changelog:
  - Optional separation of TLS client key and certificate files
  - Add patch enabling verification of TLS server (  #864894 )


author: Manuel "lonely wolf" Wolfshant <wolfy@fedoraproject.org> - 2.64-7
changelog:
  - remove world readable permissions of the config file (#962988)
  - revive the authpass patch (#970123)
  - revive improved default config settings which were lost during rebase (#895708)


author: Peter Schiffer <pschiffe@redhat.com> - 10.1.5-9
changelog:
  - related: #846699
    do the renaming of nfsiostat properly, with patch
  - resolves: #1332662
    added tapestat utility for monitoring tape drives


author: Michal Sekletár <msekleta@redhat.com> - 10.1.5-18
changelog:
  - add -f flag to force fdatasync() after sa file update (#1662094)
  - don't call filesystem count functions when we are not collecting fs statistics (#1670060)
  - skip autofs when gathering filesystem statistics (#1670060)
  - fix use of incorrect preposition in sar man page (#1624410)
  - fix CPU usage reporting (#1618688)


author: Martin Sehnoutka <msehnout@redhat.com> - 14:4.9.0-4
changelog:
  - Drop downstream patch (drop root privileges)
  - Add libcap-ng as a new build dependency
  - Related: #1262283


author: Michal Ruprich <mruprich@redhat.com> - 14:4.9.2-4
changelog:
  - Resolves: #1664648 - tcpdump post creates user and groups unconditionally, raising alerts in corporate environment


author: Petr Pisar <ppisar@redhat.com> - 1.7-39
changelog:
  - Fix maximal RSS report (bug #702826)
  - Clean spec file
  - Recompute CPU usage at finer level (bug #527276)


author: Petr Menšík <pemensik@redhat.com> - 1.6.6-1
changelog:
  - Rebase to 1.6.6
  - Enable RFC 8145 Trust Anchor Signaling to help the root zone get keytag statistics
  - Enable ipsecmod support


author: Martin Osvald <mosvald@redhat.com> - 1.6.6-2
changelog:
  - Do not search for DNSSEC info when domain-insecure is set
    for stub zone (#1678550)
  - Remove KSK-2010 from configuration files - it has been revoked (#1665503)


author: Anna Khaitovich <akhaitov@redhat.com> - 1.6.6-4
changelog:
  - Fix amplifying an incoming query into a large number of queries directed to a target
  - Resolves: rhbz#1839172 (CVE-2020-12662), rhbz#1840258 (CVE-2020-12663)


author: Hans de Goede <hdegoede@redhat.com> - 0.6-3
changelog:
  - Fix usbredirserver not listening for ipv6 connections (rhbz#957470)
  - Fix a few (harmless) coverity warnings


author: Hans de Goede <hdegoede@redhat.com> - 0.6-5
changelog:
  - Use the new libusb autodetach kernel driver functionality
  - Fix a usbredirparser bug which causes tcp/ip redir to not work (rhbz#1005015)


author: Victor Toso <victortoso@redhat.com> - 0.6-8
changelog:
  - Fix migration due lack of capabilities from source host
    Resolves: rhbz#1185167
  - New callback to drop isoc packets in order to avoid high memory
    consumption in the client
    Resolves: rhbz#1312913


author: Tomas Hozza <thozza@redhat.com> - 1.14-12
changelog:
  - Fix wget to include Host header on CONNECT as required by HTTP 1.1 (#1203384)
  - Run internal test suite during build (#1295846)
  - Fix -nv being documented as synonym for two options (#1147572)


author: Tomas Hozza <thozza@redhat.com> - 1.14-15
changelog:
  - Added TLSv1_1 and TLSv1_2 as secure-protocol values to help (#1439811)
  - Fixed synchronization in randomly failing unit test Test-proxied-https-auth (#1448440)


author: Valentina Mukhamedzhanova <vmukhame@redhat.com> - 1.1.31-43
changelog:
  - yumdownloader: fix crash on broken srpm metadata.
  - Resolves: bug#1458098
  - package-cleanup: don't remove required dupes.
  - Resolves: bug#1455318
  - fastestmirror: move the logic before MD retrieval.
  - Resolves: bug#1428210
  - yum-debug-dump: improve repo failure handling.
  - Resolves: bug#1445751


author: Valentina Mukhamedzhanova <vmukhame@redhat.com> - 1.1.31-44
changelog:
  - Add pre-transaction-actions plugin.
  - Resolves: bug#1470647
  - yum-builddep: add --define option.
  - Resolves: bug#1437636
  - verifytree: handle no @core group gracefully.
  - Resolves: bug#1349433
  - verifytree: fix handling of missing comps.
  - Resolves: bug#1333353


author: Michal Domonkos <mdomonko@redhat.com> - 1.1.31-47
changelog:
  - repotrack: add --repofrompath option
  - Resolves: bug#1506205
  - reposync: check for .. in remote paths
  - Resolves: bug#1552328


author: Michal Domonkos <mdomonko@redhat.com> - 1.1.31-50
changelog:
  - yum-config-manager: additional fixes for --add-repo
  - Related: bug#1493489
  - repotrack: print error instead of traceback on unavailable --repofrompath
  - Related: bug#1506205
  - versionlock: note default value of show_hint in man page
  - Related: bug#1497351


